Why should you be afraid if you have broken the key in the lock? How to remove a broken key from a lock: what to do if the lock is jammed and the key does not turn.

In everyday life there are a lot of unforeseen situations that can ruin all further plans. Once you realize that you turn home, insert the key into the lock, you realize that you have broken in and are stuck at the door. How to solve this problem? Let's find out.

Necessary tools

Whether any lock can be opened or unlocked, food depends on what time it is, and what tools may be needed. Axis list:

Leather item for the most important singing problem. What may be in the arsenal of your kindly friend.

Ways you can save your castle

Let us first understand what is happening number of types of door locks: with key, locking mechanism and disk system.

Alternative methods

Another unique and innovative solution involves using super-glue, steel wire, and a jigsaw file. Let me tell you again, the leather tool is used for a variety of situations.

Method with a file - you need to fix them with pliers and insert them into the lock so that the toothed surface is under the edge, then turn them around until you pull up the jammed fragment of the key, after It's very strong from the Sverdlovin. If your first attempt shows failure, repeat it until you achieve success.

The method of choice is an alternative to the first method, only this time you need to choose the right one. Similar activities are being carried out.

The super-glue method – everything here is easy to do and understandable. Let's take another key trick coat it with glue Then we go to another fragment and check the hour for fixation, which is indicated on the package. At this stage, you need to carefully hold your head for the entire hour, so that the fragments, when the least damaged, are the most important, which you will manage to spend directly on the mechanism itself, thereby complicating the problem. At the end, you can pull out the key.

Let's take a look at the soldering method. For this you need the following tools: a rod to combat corrosion, a brass tube, a blowtorch and a magnet. It is very important that the tube is slightly larger than the diameter of the key, so that it can be pulled, but not with a small force. Її The end is heated with a blowtorch And we attach it to the corner in the lock, we check the parts so that the material cools and hardens, then we apply it with a mixture against corrosion, and the other end of the tube is bent, forming a handle. We check and twist the trick.

Don't break the key, but it's stuck

Sometimes situations arise if the key is not broken, but it is impossible to get it out in the original way. This often happens in new locks with metal doors. This may be the case when the spring is under the pin, breaks, and then the core of the lock gets stuck. The problem may lie directly in the core of the locking core itself, which is made of soft material and becomes deformed, thus blocking the correct entry for the pins.

To solve this problem, use WD-40 oil or something similar. For a more beautiful application aerosol can with nozzles that can deliver the product to critically accessible areas. We take the screw and grab it by the head of the key, which gets stuck, completely raising and lowering it, creating vibrations. Then pull the key on yourself. It is recommended to immediately replace the support mechanism with a new one, as it will cause further damage to you.

It should be noted that this method of removing the key from the lock is only effective in the event that someone has broken into the front door, for other situations it is necessary to quickly contact the services of fakhivts.

Methods to ruin the castle

It is clear that the certainty of what will happen is great destroy the lock mechanism itself, fragments of the key's corners are stuck in the ground. From the very beginning you need to remove the armor lining, if it is there. For whom do you use a chisel and a hammer? Then take a nail puller and press it with a drop of self-tapping screw, then either the key angle will come out of the lock, or the core itself will be attached. Now just take a small twist and turn the lock cam.

There are situations where there is no space where a screw can be screwed in, in which case it is recommended to use a drill with a drill diameter of 6 - 10 cm. pins for the lock, you can drill straight through the core itself, or just work on the edge carefully.

Locks are damaged due to incorrect installation If the cylinder mechanism extends up to 5 mm beyond the lining, then use a Swedish key or a gas key to turn the end, twist the excess and screw the door open. If everything is secured correctly, then everything will need to be removed, both the mechanism and the lock escutcheon. The overlay is pressed with a chisel, and then the vicor is cut, inserting it into the gap, the seal is visible. After the cylinder vibrates a little, twist the doors with a key. Drive the cylinder into the middle only in case there is no gas key or other overhauled tools for opening the lock.

With this method, be careful, fragments of the cam of the mechanism may be rotated, which can damage the entire structure and block it.

Visnovok

The axis and were examined in the widest possible way to remove the broken key from the lock. Choose your option looking at the particular situation and possibilities. Remember that if the key or lock is broken, you can only talk about one thing, the system has been worn out and will require replacement. The cause of the zipped lock may be obstruction, the problem can be transferred, leaving such a mechanism initially subject to minor malfunctions.

Sometimes the problem is related to a broken key in the door lock. This situation is still unacceptable, but by following cumbersome recommendations, you can find a way out of it. In this case, it is important not to panic, so as not to cause even more mischief. How can you steal the key from the larvae?

Reasons for the key breaking in the middle of the lock

You can see the following main reasons why a breakdown occurs:

wear the lock and key;
getting into the brood or foreign objects;
incorrectly opening the lock;
try turning the key in the lock using other tools;
search for obscure keys

Different types of locks

There are the following types of locks:

1. For the type of fastening:

. These locks, the fastenings of which are used to help insert the bow into the ear. They are distinguished by their ease of installation and replacement. However, the stench may be of low severity. The area of desolation is sheds, warehouses, basements, garages.
. These locks, which are most frequently abused, are installed directly in the middle of the door leaf. It is necessary to cut them in at the metal door, so they are protected from drilling the metal sheet. The locking mechanism is responsible for its high durability, secrecy, security and value.
. Installed on the top of the door leaf. Can be used for wooden and metal structures. They are characterized by ease of installation, repair and replacement, but the stench is not strong enough to resist testing.

2. For the type of locking mechanism:

Rigelni (reiki). In the middle of them there is a crossbar with teeth and turned grooves. These locks have low strength, so using them to secure valuable items is not recommended.
Suvaldni. This is the most reliable type of lock with a secret part in the form of plates (lever). The larger the lever, the more reliable it is (6-8 is recommended). Often, lever locks can be connected to other dry systems.
. The design of the lock transmits a mechanism that consists of a cylinder, a cylinder and a lever mechanism. Cylinder locks are characterized by high reliability. The stench is one or two-sided, one or the other.
. Seal to protect doors, front doors and interior spaces. The stench does not make the key obvious, but through a low level of protection they are vikorized.
Electromechanical. Due to their design, they are similar to traditional mechanical locks; they can be opened and closed at a distance. They can be either side-by-side or overhead.

Necessary tools

How to remove a broken key from a door lock? The work is carried out due to the use of the following tools:

twist;
hairpin;
pasatizhi;
pliers;
tweezers;
jigsaw;
hammer ta in.

As a rule, it is enough to select only 2-3 of the names of the tools.

Methods of training

To recover a broken key, there are a variety of methods, which are grouped in the following order:

Happy. You can try to play tricks without destroying the castle. From the beginning it is recommended to resurface the lock using additional oil or grease. Further loops can be pulled out with tweezers or pliers.
Knight/poshkodzhennya to the castle. If more efficient methods are found to be ineffective, it is necessary to analyze the lock. Whenever it is possible to update it, please do not require a permanent replacement.
Rude. Some traditional methods of training appear to be old. You are brought to the rude evil door. Instead of learning how to break doors on your own, it’s best to become professionals.

In certain situations, the parts of the key may need to be glued together using additional glue. However, this method is ineffective, as there is a possibility of jamming of the angle, which further complicates the right side. Also, the inside of the lock can be damaged by chemical elements, which requires replacing the cylinder.

Happy methods

How to remove a stolen key from a larva? You can earn money in the following ways:

Samoriz. You will be stuck without the same keys. It is necessary to drill the opening into the place of evil and tighten the screw in the middle of the castle. Then the self-tapping screw gets crushed by the pliers and comes out at once with a twist.
A jigsaw file. This is one of the most effective ways. The file must be inserted under the key and turned so that the teeth are aligned with the beast. The ulamok splutters and gets caught.
Ribalsky gachok. This is a foldable yet effective method. To remove excess varto key, open the latch and insert the tip into the opening of the serrated part. When the key is locked, you must carefully pull it on yourself.
Pliers. Pliers are required due to the presence of a large wrinkle that protrudes from the lock gap. I’ll first ask you to oil the lock, and then turn the key. It is necessary to work everything carefully, without stagnating the supernatural force.
Vibration. This method is recommended if the key in the middle of the disk lock breaks. The grease of the pins is now bent. Then, with the help of fine twisting, the code elements are installed in the cob position. Then there is the vibration of tapping the lock with a hammer. Under the influx of vibration, the angles hang and stretch for the help of pliers.
Vityaguvannya using a metal tube. Recommended for lever locks. You need to take a tube from the middle or brass, which is used for washing. Then melt the trace with a soldering iron and heat it until smooth. After catching the receiver, you need to grab the broken key at the same time.

Methods for removing/damaging the castle

If it is impossible to train the skill, the following basic methods will be used:

Vityaguvannya. The next algorithm of action is transferred: the end of the cylinder is pressed with a gas key and burns, and then the locking mechanism is opened with a twist. If the cylinder does not stretch, it is necessary to remove the decorative trims first and turn them after replacing the cylinder.
Adding to the core. You can use a sewing machine or pins to tighten the lock cylinder. The tool is inserted into the lock gap, then the crossbars of the secret mechanism are raised. You need to handle it carefully, otherwise there is a risk of damage to the lock.
Long cylinder. It is possible to drill the cylinder mechanism using a drill. Then a little is checked and removed from the doors.
Castle vibe. The cylinder can be knocked out with a hammer by removing the armor plate from the front. However, in this case the lock needs to be replaced.
Clearing out the castle. You can resize the lock by detail after removing it from the door leaf. This method has high reliability. However, sales can only be made due to the obviousness of the doors.

Rough methods

Breaking doors is necessary when other methods are ineffective, there are children in a closed room, or there is heavy smoke in the room. It is important not to bring it to this point, but to ask for highly qualified facists, who can produce great evidence of work and have specialized tools.

The main methods of opening doors include cutting the lock crossbars with a grinder. It is possible to mount the lock, but you can also zip the doors. You can also look at the option of cut hinges, but this is not always possible due to the availability of special protection on many doors.

You should periodically check the mechanism and oil of the lock. It is recommended to immediately repair the secret mechanism if a jam is detected. It is important to watch out for a bent or broken key.

Who should I contact for help?

If you are unable to resolve the problem of self-pushing, it is recommended to seek help from highly qualified professionals:

ZHEK. Fahivtsi will arrive no later than in 1 year. The stinks are forced to open the doors using gentle methods. Maistry looms the right to take possession of the owner of the apartment for a confirmed person. In the event that a residential area is taken on lease, it is necessary to make arrangements with the rulers so that they arrive with documents.
Commercial services. First of all, when contacting the employees of commercial companies, it is necessary to check whether they have special permission to work and a contract for the provision of services. At their own expense, they can extract a passport from the owner of the apartment, which confirms registration in the apartment. If the company does not have the necessary documents, the fee for these services may increase significantly.

How to avoid breaking the key in the door lock?

It is necessary to insert the key into the core of the hole more carefully.
It is recommended to periodically clean and oil the lock.
It is necessary to select a variety of keys to match the specific type of lock.
It is important to regularly check the lock for signs of damage.
You will need to add special tools so that you can complete the job quickly.

The bottom line is that you can solve the problem of a broken key in the lock on your own; in particularly difficult situations, you should quickly seek the help of professionals. To avoid such situations in the future, try to install high-quality locks and keys, as well as follow all the basic rules for preventing malfunctions.

It’s like: “the lock jammed, they turned it with the key.” And a lot of people are like that and work. This is often found in rented apartments. Use the key back and forth, and the axis - half of the key is lost from the lock hole. How to pull a broken key out of a lock? These recommendations will help you get by without a master with minimal outlay.

The process of removing a broken key from a lock

If the key breaks in the door lock, there may be a variety of reasons, unidentified defects in the lock, or the key itself may be the main cause of the key break.

Regardless of the reason for the use of a broken tool for opening doors, the main problem is one thing - to pull it out.

Tools for the key removal procedure

In order to remove a broken key from a door lock, you will need a number of tools that you can find in your neighbor's house, since it is not a private house with a garage.

Є 3 methods for removing the key bits from the lock core at the door: loyal, the method of moving the locking mechanism, the rough (cardinal) method.

How to get rid of a broken key from a lock?

Alternatively, if the key gets stuck at the lock core, the ruler will not reach the house or apartment. In this case, do everything you can to carefully remove the key and not damage the lock mechanism.

The main cause of this problem is the saw getting into the mechanism, which, mixed with lubricant, turns into a saw. In order for the key to come out of the lock core, harden the paste:

WD-40
Cleaning (drain the oil from the car engine).
A little solid.
Preservation of rare silicone.

The worst symptom is the stagnation of nicotine oil.

Making a lock to remove a broken key

You need to take a medical syringe and pour olive oil into the middle of the lock. The key hole needs to be thoroughly treated with oil. When the key is locked, you do not need to use force or sharp movements, carefully roll it from left to right and slowly pull it towards you. As soon as you squeeze your fingers, the pliers tighten. Either key may be blocked by the lock protection system. You might also need a paper clip or a hairpin.

The process of opening a lock with a violin

Why bother if a piece of key is lost in the lock? Todi:

These methods are aimed at getting rid of the problem. If the stench did not disturb the village, then proceed to the fortification of the castle.

It’s impossible to waste the door, the key breaking into pieces? This situation could seriously confuse anyone. If you know a number of lifehacks and practice for the sake of professionals, you can easily solve the problem.

Apparently, since the neighbors were not at home, and the phone was dead, and there was no one to call for help, the situation can be resolved independently.

Among the main reasons that lead to a key breaking in a lock are:

removal of the internal mechanism of the lock;
getting into the dam or other third-party objects;
retrieval of an invalid key whose insertion is incorrect (not until the end or near the end);
poor material from which the mechanism and key are made.

There are basically two problems - removing the stolen surpluses from the castle or damaging the entire mechanism.

Different types of locks

Door locks are divided into 3 groups based on the installation method:

vzne;
in the future;
invoices

The first type is one of the most aesthetic, the pieces are inserted directly into the canvas of the entrance chair, and do not lose their mass. These devices are best suited for metal doors.

All locks can be called safe, their fragments can be further protected from harm with special metal inserts.

This option is rarely used in residential areas, although the structure is simpler: the wine will leak through the original ear. However, such mechanisms can be used to secure storage areas, basements, basements and other government objects.

Overhead mechanisms are often placed on the door in the middle of the room, so they can protect against the entry of evildoers when the rulers are at home. You can’t beat such a castle, apparently, the evildoers have no capacity for such evil.

Tools needed to remove the lock from the door

In order to remove the excess key from the door drill, you may need:

Just by pouring the oil into the lock field, you need to print it to the robot. Seal 10-20 mixtures until the oil spreads over the surface, which will significantly simplify the process of extracting the cracked excess. Proceed immediately after receiving the key.

How to remove a broken key from the lock core

From now on, try to reset the lock to the maximum possible level, since the doors are already closed. To do this, all the bolts are unscrewed using a screwdriver, using pliers or tweezers, you can pull out the twist, and then the mechanism is cleaned and cleaned. The castle will be reassembled immediately after this.

Unfortunately, if it is not possible to get into the booth in any other way, the problem can be solved by one of the simplest methods:

For additional help, I sewed some stilettos

Two thin awls (or pins) are inserted into the gap between the key and the lock at the bottom.
With light hands, what to steal, the tricks move step by step.

For additional help with screws

In the middle of the hole, drill a hole with a diameter similar to the visible screws.
One self-tapping screw is carefully screwed into the hole, and then it is completely pulled out at once from the excess.

For help, use jigsaw files

What's wrong, since the extra key is not captured

If you have tried all the methods, but you still can’t remove the lock gap, you can try one of these methods:

Vytyaguvannya larvae of the castle

When you pull out the cylinder - one of the key elements of the locking mechanism - the parts are easy to clean and open the door with a twist:

when the cylinder is in position.

Its end is pressed with a gas or other round key and burnt, and then the lock is opened with a flat screw;

because the cylinder does not protrude.

Any type of wrench will help: the top cover is first removed, and then, behind the front algorithm, the gas key is turned on.

Long cylinder

The central part of the lock can be removed by drilling:

use a drill with a diameter of 6-10 mm to tighten a cylinder;
the damaged cam of the mechanism is pulled back;
Using a bent twist or a sharp dart, destroy the lock bolt and open the doors.

Vityaguvannya using a metal tube

You need a brass or copper tube:

the diameter is due to the part of the key that has lost its ring;
pressing hard, push the tube onto the pin to wash;
Vikorist and soldering iron, melt the end of the tube;
attach the tube to the lock in the lock, check on it from the outside;
With a sharp ruff, pull out the remaining part at once from the excess key.

And the axis is about how to open interroom doors, without a key, video recognition.

What if you need the evil of the doors themselves?

All the best methods have been tried, but there is no result.
There is a little girl at the closed booth.
From behind the doors you can smell the smell of fire or smoke.

In other situations, it’s better to contact the fakhivts, who, with minimal expenses, can open the entrance to the booth.

Who should I contact for help?

If the lock has lost the key and it is impossible to open the door without outside help, please call special services:

Housing Office, a caring company at home.

The representatives are obliged to come to you within 1 year and try to resolve the problem in a gentle way. In this case, they have the right to demand the presentation of documents to confirm your stay in the apartment.

If the living space is for rent, then call the landlords and ask them to come with documents.

Commercial service services.

Having seen on the Internet or on leaflets asking from postal screenshots, the telephone number of such a company will then be re-converted to the fact that their employees are ready to issue their permission to work and a contract for the provision of services.

On their side, they have the right to extract a passport, which confirms registration in the apartment or a booth with a lock, which confirms. Some companies do without presenting documents, otherwise they will have to pay many times more for their services.

If the problem becomes more serious it will be necessary to break the doors, for an additional fee the service can improve the security of the entrance to the apartment or the booth, and install a new lock.

How to avoid breaking the key in the door lock?

To overcome an unacceptable situation, the master recommends following simple rules:

Every now and then, apply ointment to the locking core.
Use only the keys that fit the mechanism.
Regularly inspect the castle to prevent clutter and damage to third-party objects.
Instruct the entrance to pack an “alarming” bag with tools that will help solve the problem.

How to quickly open the lock

In case, if the key is lost in the lock and the door is opened, you can use a number of methods to spare it. Do not damage the mechanism and ensure that there is no need to purchase a new device. If these methods do not help, you will end up using additional tools, otherwise the integrity of the castle will be destroyed.

Sometimes it is impossible to do without the additional services of facists, which can be obtained in the company that it manages, or in a commercial company. To avoid such problems, the easiest way is to regularly visit the castle and carry out cleaning and washing.

In our life there are all sorts of tricks and unpleasant challenges. While acceptable situations bring joy and contentment, unacceptable ones can lead to anger, frustration, and disappointment. Singingly, the threads tied to the door locks, or more precisely, to their breakdown, were woven from the wealth. So, not everyone can answer the question: “How to get a key out of a lock if it’s broken.”

Difficult situations can cause panic, which can disrupt the rational process, lead to stress and the inability to know a way out of the situation. In order for something not to happen, it is necessary to prepare in advance for the situation that may arise with the skin. You can remove the key, but for peace of mind and courage.

Some careless actions and near-misses can lead to the fact that the castle is not only lost, but completely sealed.

It is practically impossible to open the doors with the key locked in the lock. It is important to know the reason why the key is broken, and also to know the parts of the lock mechanism. The reasons for key failure can be even different.

Why can the key get dirty?

Since the key is very acidic, it can easily bend and then become damaged. When purchasing keys, it is important to pay attention to the material used, as well as the storage material.
The lock and key can simply be worn out. This means that the locking device at the lock can go wrong. The insides of the castle can be covered with saws and brutes. If the mechanism is not regularly cleaned, the key in the lock will collapse tightly and may break.

Sometimes a simple human factor contributes to the breakage of the key, when the key is inserted halfway into the lock and it pushes against it. Of course, once a breakdown has already occurred, it is not possible to immediately explain the reasons; it is necessary to start the main problem. Nowadays, you can find solutions on the Internet, unless the situation becomes so stressful that action requires a well-thought-out plan.

The key is stuck in the door lock: why bother?

On the Internet you can find a lot of articles about how you can easily, quickly, and simply pull out a broken key. However, in practice everything turns out to be very complicated. If the key gets stuck, it gets stuck in the lock - getting out of it is not so easy.

For example, there is a common idea that the key from the lock can be easily pulled out with the help of glue - this is actually a myth.

This method will not only help you pull out a key that is stuck in the door lock, but it may also cause another part of the key to become lost in the lock core. When choosing a method for obtaining a key, it is also important to remember the possibility of breaking the lock. Today's locks are expensive to construct, so it is better to choose a careful and safe method of getting the key.

Options for obtaining a key:

Rose the castle. Be careful with the lock so as not to damage it if you remove the key.
Vikoristovuvati screw. Using a thin drill or self-tapping screw, you can carefully pull the key out of the drill bit. It is important to carefully remove the key from the stuck one.
Stiffen the pliers. Since the key protrudes from the drill bit, it can be pressed in with pliers, but the key cannot be squeezed out even once.

When trying to remove the key, it is important to remember these steps so as not to damage the secret mechanism of the lock. It is important to understand how deeply the key is planted and the methods used will actually help solve the problem, rather than force it. The methods of unlocking can be different, but the essence is the same - pressing the key with force will not do anything but damage the lock mechanism.

How to open a door if the key is broken

On many Internet sites, home buyers ask: “What should I do if I can’t get the broken key out of the lock?” This situation is well known when it is difficult to get to the apartment or to leave it becomes impossible. Є methods in which the key is easily removed, і open the door with a length of 10 lengths.

If you lose the key at the entrance doors, the first rule is not to panic, do not start things rudely or aggressively.

I have a lot of history that the key is checked before breaking. Many who are tempted to press on someone stronger, trust that they will help. But such actions often lead to the key breaking.

Options for obtaining a key:

I sewed for help. Take two tools, use them to lock the key and carefully move it from side to side. Before the operation, it is best to lubricate the lock gap with machine oil or anti-corrosion agent.
Using a file like a jigsaw. Help yourself by sawing the piece of key so that you can easily grab the tooth by the tooth. As soon as it was possible, it was necessary to pull as hard as possible, with a few small twists from side to side.
Use a blowtorch and brass tube. The brass tube is placed on a hook, heated and the key is pulled out.
Ribalsky gachok. This tool allows you to remove the key without damaging the lock core. Ulamok is sealed with a hook. This method will require patience.

If successful, all operations from the removal of the key also appear on the lock core. If you can’t give out the key on your own, it’s better to contact the fakers for help – they’ll be a great source of evidence from their authorities. Finding the key and unnerving it is not the best option.

Options: how to knock the lock out of the door.

Sometimes it happens that no method will help you open the lock. The most important way to quickly open doors is to knock the lock out of the door. It won't be easy to earn money because you don't know what you need to do. This method will help those who are in a hurry and cannot check until the fahive arrives to help.

Encourage people to knock down doors with their shoulders - this is a good method, but only for those who have sufficient strength. After three tests, it’s hard to believe that the castle will give in.

Vibity lock can be achieved with a strong kick. But here we must respect that it is necessary to go to the place where the castle is located. The force of the blow may be maximum, so otherwise the castle may be lost in place.

How can you vibiti lock:

Vikoristovuvati “glottannya”;
Vidmichka;
Bumping.

Opening doors without a key is even more difficult. As soon as it’s time, it’s best to call for help to a specialist who specializes in special and professional equipment, fix the doors so as not to damage either the lock or the door structure. If a key is stuck in the lock, you need to try to pull out the lock cylinder first. If you can’t give it away, then the lock on the door of the apartment or the booth will have to be broken.

When I broke the key in the lock and pulled it out (video)

There's plenty of people to lose in the situation if the key to the lock is broken. A part of the key was missing from the core, which did not allow the door to be opened and opened until it was installed. When it’s time for people, they can call the policeman from the door. If there is no time for an hour, you need to do it yourself. It's important not to get nervous. It is important to deal with a stressful situation and allow yourself to be aware of it before such a situation occurs. If the key is broken, there is no need to remove it from the Sverdlova aggressively. You need to try it, and lightly loosen it, pull it out.