Shanovnye on the site “Visiting Samodelkin” from the material presented by the author, you find out how you can independently make a moped using a “Friendship” chainsaw
From Radyansky hours, who still remembers such marvelous technologies as a bicycle with a motor, the common people have a “dirchik” between a bicycle and a full-fledged moped. The technology is good, the cost of burning is low, and the rights are not needed)).
This generation is richly covered in plans for modernization, upgrading, restoration, and tuning. Recycle factory equipment so that the designers do not recognize their creation))
The axis and the author came up with the idea of making a moped with a “Friendship” chainsaw, but not looking like a self-made moped, but looking stately and elegant. The master already has proof of the development of such technology and has a ready-made moped, on which basis he will create this masterpiece.
The frame is mounted under bicycle wheels, a tank, a headlight and a seat similar to the Minsk-103 motorcycle are installed. It feels wonderful and doesn’t get hot.
Come on, let’s take a look at what the author himself needed before building a moped?
Materials
1. motor for the “Friendship” file
2. bicycle wheels 2 pcs.
3. tank, headlight, seat from the motorcycle "Minsk-103"
4. 4 cans of farbi and masking tape
5. metal pipe 16-20 mm
6. cable
7. Lanzug
8. Stars like a bicycle
9. bicycle forks, front and rear
10. all
11. hose
12. plastic dance
13. dropper
14. kermo
15. throttle handle
Tools
1. cooking apparatus
2. grinder (angle grinder)
3. drill
4. set of nut wrenches
5. hammer
6. twist
7. pliers
8. roulette
9. emery paper
Pokrokov's instructions for making a moped with a chainsaw "Friendship" with your own hands.
As it was intended above all, the author has already completed the production of a moped with a chainsaw engine, but the design was laid out in the distance, and the maximum speed was about 35 km/year, the current appearance was also very beautiful. The author affectionately calls his creation “Stool”))
I wanted to create something that was more useful and practical, something similar to a regular moped or chopper, so that such technology would not be embarrassing to ride on the street, but would, in turn, catch the chuckles and hidden glances of passers-by) For the butt and the basis of the bobber axle
After that, I made sketches on paper with a small paper pen, marking out everything that needed to be radically changed and added.
The old frame lost the lower part welded from a professional pipe, and the new design added bicycle wheels and rear and front forks. During the first day of work, the author welded the frame, installed the tank, headlights, and wheels.
All the parts were naturally old and rarity, so the welded seams themselves needed to be cleaned, and then the prepared surface was filled into a ball of balls with periodic drying using farbe from spray cans, master vikorystovav farbe "Montana".
So after painting, when the frame is dry, apply another ball of matte varnish, even with a spray can.
The bicycle wheels were also old, they were usually covered with painter's tape, sealing the rims and filling the wheel spokes.
The wheels were also coated and hung on a motor so that they could dry out quickly.
All fabricated parts were assembled into a single design and the resulting axle.
A few days ago, the engine died, unfortunately, because it was already very ancient and the time had come for it to be destroyed for spare parts and melted down.
Dvigun was kind, but I had the chance to be separated from him.
At the same time, installing a new engine from the same “Friendship” chainsaw, just new for 1992. release, supplies for winter and the dawning hour has come)
How to wash yourselves “Oh bad, bad, close” What to do? First of all, the author changed the gear ratio on the lance gearbox, which is formed from the bicycle wheels and lance.
It didn’t help at all, which means it’s not the reason. And then the idea came to create a water-cooled chainsaw engine. How can you live your life? The author began to step on his feet, carefully take the plastic flap and two hoses attached to it, one at the top for taking in wind, and the other at the bottom for supplying water through the dropper to the cylinder head of the Druzhba chainsaw engine. This is the kind of watering of the droplets)) And just as the author says, the engine stops heating up on the moving covers and feels miraculous.
What is the axle of such a wonderful moped with an engine like a chainsaw and water cooling from the author.
Having also created and shared beautiful photographs of his child, let’s marvel)
If you buy a classic moped from old spare parts, you can completely replace it yourself, and you can solve the problem of overheating by installing a water dropper. If you have rare spare parts
The engine of any chainsaw can be modified to produce simple equipment: from a mower to a helicopter. Everything should be left to rest under the commandment of the Master. Not everyone understands why the engine itself was made from Friendship 4. Not everyone fully understands what you can make with your own hands. This article was written to help the masters and fill this clearing.
There are absolutely no arguments why you should use the Druzhba chainsaw to process the warto vikorist:
- popularity - the chainsaw was even more popular in the SRSR, because There simply weren’t any other beers, except Ural.
- Price - today on the secondary market the price in stock will vary from 1000 to 2000 rubles.
- Toughness - saw to be classified as professional, used for felling trees, so it is good for such self-propelled machines as a mower, a helicopter, a sawmill, all-rounders, motorized vehicles and others.
What is needed for work
To make your own, self-propelled chainsaws, Friendship is required to recruit a master-cob tool, a favorite and an idea. The basic tools needed for the robot are the grinder and the welding machine. You already have a bathroom, otherwise you wouldn’t be here on this side. You will find the very idea for modifying the Friendship chainsaw into any unit in this article.
The article presents only the idea, without step-by-step instructions before action. Otherwise, the situation was tens of times greater. If, after reading, you will be deprived of nutrition and you will need report instructions, then leave your needs in the comments until the article and we will write about the procedure for processing a chainsaw into a specific unit that will take the greatest advantage no.
What can you earn from chainsaws Friendship
There is a long list of techniques that you can make with your own hands. Everything is limited by the master’s imagination. A lot of videos have been published on the Internet with a detailed description of the process of making self-made meatballs. As part of the article, we have collected the most interesting videos, on the basis of which you can easily develop the equipment you need. The simplest self-confident one is used for a new motor, and the folding one is used for all vehicles, motorized vehicles, and lawnmowers. Let's apply the self-propelled gun from simple to folding.
Lower tire
This virus is not directly related to the Friendship 4 chainsaw, but it will drink because The bottom of the chainsaw tire of Friendship is very well sharpened, resistant to corrosion. For preparation you only need the splint itself and a saw. The price on the secondary market varies from 200 to 500 rubles. To implement the product, you should watch this video, the author of which describes how to make a kitchen knife from a tire. The special thing about the video is that the author shows a simple method for drilling the opening into handles, without drilling.
Bike
To build a bicycle with an engine and a chainsaw, you will need Friendship to drink it yourself and use a Kama bike with a trunk. The process of preparing the self-box:
- Attach the engine to the bicycle frame.
- Place the throttle cable and the trigger on the kermo.
- Use a lance to connect the drive wheel of the bicycle and the pulleys on the engine.
Mower (lawn mower)
To build a mower, you will again need the Druzhba 4 chainsaw itself, small wheels, lower and rolled metal for preparing the body and dry casing. Whether it’s a walk-behind mower or a lawn mower, everything depends on what working diameter will be laid out in the project. We present your respect to the video, the author of which has cut a mower from a Ural chainsaw (there is no real importance in Friendship, so we recommend it before re-watching).
Motor for chovna
Turning a chainsaw into a new engine will be much more convenient, like a bicycle or a mower. You will be aiming for contact with water, and with it, obviously, you will need to be extremely respectful. Following the recommendations of the rich masters, they brought the shaft better than vikoristuvat from the old master motor. Driver of Friendship 4. Lose your purchase. For the butt, we recommend watching this video, the author of which built a motor for the chainsaw Friendship 2. The author demonstrates how to drink in a barrel of water.
Sawmill
You need to build a sawmill with a chainsaw, and make enough equipment for the late dismantling of the log. The trick is to place the saw blade in a flat area around the log. To get started, we recommend watching the video demonstrating the device in action. From the video it becomes clear that for self-assembly the required minimum of materials is basic rolled metal (profile pipe).
Everywhere
It’s already very difficult to break a chainsaw everywhere, but it’s still possible. There are a lot of videos on the Internet, the authors of which have implemented this idea. The whole point lies in the fact that you need to prepare your chassis: frame, wheels, drives, etc., and how the engine will be vicorized by the chainsaw Friendship 4. One recommendation - do not vikorist the wheels of the primary chamber, connected and around the perimeter, such wheels So much lighter than those that with tires that match the engine it will be much easier to crash.
As you look around, you will be amazed at the video about the self-propelled one going everywhere with a chainsaw. Friendship 4. The self-proclaimed one has a scooter, a goose, which means more snowmobile, less everything.
Motorized dog (motorized towing vehicle)
The preparation of a motorized dog with chainsaws Druzhba 4, as well as at the end of the entire journey, also comes down to the development of the chassis: frame, caterpillar, rubber, etc. And they drank engine without any destructive power.
It’s worth watching this video, the author of which shows how to make a motorized dog using improvised materials. For example, the caterpillars are made from high-quality plastic pipes, and the entire frame of the motorized towing vehicle is made from special profile pipes of small diameter.
Gwintocryl
Transforming a chainsaw into a helicopter is, after all, just an experiment and has no practical implications. There are videos of lethal machines on the Internet, the authors of which developed such projects and implemented them in real life, for example, a self-propelled flight using a chainsaw.
Visnovok
Friendship 4 is an ideal option for DIY technology development. Inexpensive and accessible, no problem, lots of ideas for implementation. The head is the same, as soon as it is out, there will be a mower, and a motor for the tractor, and everywhere else, and a lot of other things. Good luck, engineers!
A.Moreev, E.Pavlov, engineers
Marvel at how the lumberjack unmovingly cuts down a tree with a gasoline-powered saw, Druzhba. Even with the help of a transverse and electric saw, I would have to work all day in a bent position.
The Friendship industry released the saw specifically for timber harvesting, but it turned out that it could carry out various operations.
For this purpose, instead of the sawing machine, install a gearbox, which is removed, and replace the set of working tools: drills for metal and wood, impact wrench, metal brush, grinding wheel.
Saw Friendship of all trades.
The gasoline-powered saw The friendship of lumberjacks is rightfully respected by the burning saw. It will not require a cable or a permanent power station. But it is no less valuable that, in addition to the main operation - sawing, you can perform a variety of tasks: clearing the overgrown area; drill an opening in wood and metal; drilling under the slopes, forest-planted pits and vibukhov holes; tighten the nuts; clean metal surfaces with a steel brush; grinding, sharpening tools and finishing a number of other metal and wood processing operations. For this purpose, the sawing machine is replaced with a gearbox, which is subject to the installation of a suitable working tool.The engine drank Friendship, it’s easy to have a propeller screw and, having placed it on the chevney, set off along the river. If it is a power generator (for example, a car generator), then you can convert the chain saw with the generator into a portable power station for lighting. It is even more important: to remove the electric current from the forest to brighten living areas, to prevent emergency operations at night, in the washrooms of distant expeditions, etc.
On high-gauge railcars there are manual carriages on several wheels with a lance gear. You can put a gasoline-powered saw on such a truck, and the truck can immediately turn into a motorized tire for two people, which can be moved at a speed of up to 15 km per year.
You are far away from a place where there is no electricity. Start the engine, charge the battery - and you will ensure that the radio receiver works.
There are a lot of earthen plants in the garden. Come to the gearbox and drink the fluffer - and the robot from fluffing the earth will move forward. Put the engine on two wheels and the garden tractor is ready. Connect this engine to the pump, and it pumps water from the well to you.
Another hand tool is an electric lopper. As Friendship drank, it is the same in all logging enterprises. They can also eliminate different robots. For this purpose, replace the sawing machine with a gearbox, which is removed, and install a new working tool.
As you know, portable motorized tools are more powerful. Think about it: is it not possible, vikorista, to mechanize other manual robots?
Instead of using a wrench, you can install a drill for digging holes, and with the help of one person you can safely work under the steps.
And if you need to pump up water or drink water, then the drink will also help you.
A famous comb can be earned in any kind of workshop. Attached to the sawing bar, it helps to increase productivity when clearing chagarka or trimming knots.
"From the presented material you will learn how to independently build a moped with chainsaws "Friendship"... Today, the popular topic is the creation of various bikes and bicycles with engines from chainsaws, where mainly Vikorist brands "D" are used. Friendship" or "Ural". But the author wanted to create something more elegant and simple, so that it would look more like a regular moped or chopper, having already assembled a moped, but the new look was not even in control. A new design is made of bicycle wheels and to add a cool look to the installed tank, headlight and seat of the rare motorcycle “Minsk-103” there are 2 hoses going from it, one uphill for air intake, and the other connecting to the dropper and through it here I dream of dripping water on the cylinder head , thereby chilling її. The dough itself is firm and secured with rubber bands so that it can be easily removed and refilled with cold water. The dropper can be opened and closed by standing on the spot, closing it, going out of the way)
Let's figure out what you need to build a moped with a Druzhba chainsaw
Materials
- chainsaw engine
- bicycle wheels 2 pcs
- tank. headlight, seat from the motorcycle "Minsk 103"
- pipe 16-20 mm
- splash, hoses, dropper (for water cooling system)
- Lancium gearbox
- farba in cans
Tools
- cooking apparatus
- Bulgarian
- emery paper
- twist
- set of nut wrenches
- pliers
Pokrokov's instructions for creating a moped with a chainsaw “Friendship”.
Mriya ta zrazok za yak bulo copied moped. 
Having sketched a sketch of a future moped. 
Having welded the frame and fitted the bicycle wheels. 
Fabrication of frames, wheels and spokes. 
Having installed the engine from the old moped. 
A while ago the engine died and I had to install a new one, the author had some in stock over the winter) 
Further, the author solved the problem after 20 weeks of work, the engine overheated and became silent, changing the transmission number on the gearbox. 
The engine kept heating up and the author came up with the idea of creating a water-cooled engine. Why take a plastic bowl and connect 2 hoses to it, one uphill for air intake, and the other connecting to the dripper for supplying water to the cylinder head of the Druzhba chainsaw 
Now the engine does not heat up and runs normally, the speed reaches about 60 km/year, and the old moped reaches a maximum of 35 km/year. 
The axle is such a miracle and an elegant moped Viyshov) 
Backpack type helicopter made from a chainsaw. A sawmill made from a chainsaw, which can be built using an additional metal frame. A chainsaw is firmly attached to this frame.
In the hands of the craftsmen there is a chainsaw, primarily intended for sawing wood, which is truly a richly functional device. There are various types of special attachments on sale that significantly expand the capabilities of the chainsaw. Ale, no matter what, there are plenty of clever people who recycle chainsaws on their own, vikoryst, and other materials at hand.
At the heart of every chainsaw machine is a vikoristan as a universal drive that can be used for a large number of different devices. Realize the potential capabilities of a chainsaw with the help of various devices and attachments. Tools made from chainsaws are guaranteed to be hermetically sealed, so they can be used in almost any situation.
A cultivator with a chainsaw engine.
A winch that uses a chainsaw drive. A new chainsaw engine is a wonderful alternative to buying an expensive engine. A chainsaw engine is mounted on this frame. A portable power station with a chainsaw can provide energy in any places remote from electrical power lines.
The self-propelled snow blower can be used with saws, the power of which exceeds 3 kW. To do this, it is necessary to mount the auger assembly with blades made of soft, non-elastic material.
A self-propelled snowmobile with a chainsaw, due to its design, is folded behind the saw blades. The snowmobile consists of a frame, engine, track and kerma control. You should also consider a shock-absorbing suspension system for non-bearing frames. Since a chainsaw does not have a transmission, the couplings on a self-propelled snowmobile should be placed in the center. The forging of the lancet can be made by people who are familiar with the farrier's right. For this purpose, first of all, old lantsugs are divided into scraps, which are then boiled at the workpiece.
The chainsaw is very popular among home builders, as it has a universal drive for original self-made designs. With your own hands, using a chainsaw, you can make leather, which can be done using a welding machine, a grinder, and, if necessary, a lathe. First of all, what comes to mind when you think about what you can earn from chainsaws like sawmills.
On the boards, a sawmill with chainsaws can also be used without problems, only in this case there will be a lot of outputs, the fragments of the cutting lance from the splint are often used for sawing with stitch saws.
The winter line of self-propelled transport devices is complemented by aerials and chainsaws, which are structurally simpler than a snowmobile. The main requirement for the maneuverability of such a machine is the minimum tension of the chainsaw. The basis for the design is my grandfather’s old chainsaw Druzhba and an equally ancient bicycle, with which you can carry out any experiments on processing before installing the drive. Such a moped with a chainsaw is equipped with a gearbox with a gear ratio of 18:1 and a variable speed drive, which allows you to comfortably change shoes on the new speed of a high-speed bicycle.
A full-fledged walk-behind tractor from a chainsaw can be easily created through the marriage of tension and traction force. The chainsaw motor has only one thing to wrap around - a cutting lance or a screw mechanism for a snow blower. The most praised winemakers have long been amazed at the ability to use a chainsaw as an engine for a lethal machine. The drill bits work at low speeds, then to adapt the chainsaw motor it is connected to the auger through a lower worm gearbox.
A bicycle with a chainsaw motor
It contains the frame, the engine with a gear reducer, the control panel, the generator and all the necessary electrical cables. If you understand the nuances of thermal processing of metal, then you can produce solid forgings from the lance, which will serve your resource.
Below are a variety of devices made from chainsaws. A motor cultivator can be made from a chainsaw using leather. You can make chainsaw boxes with your own hands almost anyone who wants to know a little bit of technology.
