The foundation є the basis of the awakening, it is the fault of being guilty of being overwhelmed by the supernatural, the vitrimati of the building. Armouring the foundation to rob them of greater and greater excellence and from the term of service to all awakenings. Before the cob of the stem, for your booth, you need to have the correct visonati rozrahunok reinforcing bar. For the whole warehouse, a diagram of the foundation must be reinforced.

Yak properly rostashuvati fittings

Basically, it is installed, which is poured into the warehouse, showcases the later fittings, and is installed in the lower and upper parts of the foundation. Whenever the height of the perevischu is equal to one meter, twigs of smooth reinforcing bars, the diameter of which can be folded from 6 to 8 mm, can be tilted.

Later bars reduce the number of bars in concrete. If the frame has been installed in its function, it is necessary to comply with the standards before the end of the day.

Zgіdno SNiP is seen between the late rods of the type of construction. Varto mean that it’s innocent if it’s over 400 mm. As well as the rules of zehtuvati, it may be too bad for you to showcase your waking up.

Rules for armoring a striking foundation

To correctly build up the foundation with your own hands, you can read the main pardons for newcomers and learn about the recommendations that you need to take for an hour. It can be integrated into the quality of the presentation and the term of its exploitation. For an hour, robots need to follow the next recommendations:

  1. As a rule, there is a line foundation for a 1-2-top booth, rods become stagnant, the diameter of which becomes 10 to 24 mm. The smaller diameter is unacceptable, so when installing thin rods, the foundation can be deformed.
  2. Z'є Z'єdnannya is guilty for an additional dart. Viconati is a good idea to visit a person who has not been involved in such a robot before.
  3. If the soil can be of the same size on all diameters, it is possible to pick up reinforcement with a diameter of 10-14 mm. Also, the thickness is not uniform, it becomes stagnant with a twig from 16 to 24 mm.
  4. For the foundation, it is not possible to vibrate smooth reinforcement, so how to fix rods with concrete will be better. Smooth reinforcement can only be fixed in the position of the transverse elements, so that they are infused with less pressure.
  5. Later, the reinforcement is guilty of roztashovuvatisya not closer than 5 cm from the formwork. Yakscho not to meet the rules, concrete can be cracked, but twigs are rusty.
  6. The appearance between the cross members of the reinforcing cage is guilty in between 25 to 45 cm. Violation of this rule can be caused before it becomes less efficient.
  7. Armouring of rebar is developed during the process of laying reinforcement in the trench.
  8. Later, the twigs are guilty to fit through the skin 40 cm at the top.

Adopting the technology of armoring of the striking foundation can be seen in all robots independently.

formwork installation

The formwork was correctly folded with the economy of the concrete gap, as well as facilitated to the armoring process. Such a frame is folded into a block of stages:

  1. Vibir material for formwork. Even though the foundation is not very high, it can be used for materials such as plywood, fiberboard and OSB-plates. Alleged material is guilty of enough money to showcase the renovation, to build up the concrete madness.
  2. Presentation When making a trench, it is necessary to open a pillow and a cushion for the foundation. For sealing and ramming 15 cm, pouring 4-5 cm of concrete is poured. It’s necessary to clean the surface. It’s worth the memory, but at all stages it’s necessary to think about those that will be roztashovuvatisya communica. If it’s not vrahuvati, open the door to get it in the finished structure, which can lead to deformation.
  3. Formwork replacement. At all stages, the installation of picks and rods, which are necessary for fastening the structure, is considered. Even so, such robots will not be carried out, before the hour of pouring concrete, the formwork can deform.

The formwork for the foundation is to blame for being rough and without gaps, for an hour of pouring the sum did not flow through the cracks.

Important! Bagato cover the formwork from the middle with technical oil, otherwise it can be applied, so that the concrete will become hardened.

Armuvannya of striking foundation

When the height is greater than 150 mm, transverse and vertical reinforcement is mounted, the diameter of which can be folded 6-8 mm. Vaughn can be either metal or scloplastic. It is innocent of the rules to become more than 400 mm by means of lateral reinforcement rods. Between the transverse reinforcement, but not more than 300 mm.

Varto pam'yatati, scho z'udnuvati reinforcing elements zvaryuvannym should not, as it is to reduce the strength of the frame. The very same hour of the stem of the frame is victorious to knitting. It is important to install the reinforcement for an hour, so that the metal does not stick to the ground, so it can lead to the appearance of the irrigation.

I especially respect for the hour when they are working, it is necessary to come up with an armouring of the foundation, so that a great deal of investment is added to them. On tsikh m_stsyah, it is innocent, but simple ones are overwhelmed by fittings. The kuti were showcased at the end of the day, it is necessary to enrich it and close it with additional clamps.

At the same time, it is important to adhere to all the elements of the construction in such a rank that it’s a monolithic one. As a result, it becomes more and more deformed.

Varto pam'yatati, how can you give us a great deal of pennies. The main thing for this type of transfer is the fact that it’s great vitrimuvati great navantazhennya and vitrimu zsuvi ґruntu. At the same time, such a foundation can serve as a black man.

Before the arrangement of such a place, let us see the nobility of a part of the ground and the restoration of the Maydan. Pislya tsiogo zipaєtsya pischano-gravіyna pillow. On the offensive stage, the installation of wood formwork is seen. It is important to install the design and install the connections.