The boardroom can be arranged at a private booth or at an apartment in an old plan. The main thing is the ecological purity, warmth and acceptance of tactile vision. The very thing is rich in vile living primitives, bazhayuchi continue the term of exploitation of wood pokritty for food, do not be quick to see the doughs, but to fail to virivnyati їkh. Pomilkovo respect, how to make a tree for a log can be deprived of help testers or wake-up professionals. For some people, having theoretically trained, it is possible to carry out robots from the podlogs without seeing the boards independently.

The pidlog board can be checked in the following ways:

  • vikorystannya shlіfuvalnoї machine;
  • putty;
  • by way of laying sheet material;
  • screed.

Vikoristovuchi roll or tile material (laminate, linoleum, PVC plate, carpet), the irregularities of the wood podlogi are not possible.

Before carrying out any work in the general order, it is necessary to consult a financial system for the integrity and availability of a pedagogy before further exploitation. In general, the repairs will not be successful and will soon come to non-availability.

To correctly vibrate the way of broadcasting to the booth, it is necessary if there is a certain amount of irregularity. Even if the irregularity of the podlogs is up to 1 mm, there is enough cycling. A drop in height of 2-3 mm is used with a putty. Laying sheet material on the logs to correct the drop in heights up to 10 cm. Minor irregularities are taken into account, as the linoleum is laid on the floor. Laminate is not suitable for such purposes.

Cycle procedure

Vikoristovuvati machine for cycling is possible, as the boards are rostatusovuyutsya horizontally. Special equipment is not required to fit for a one-time procedure. Come hire to hire.

Step by step describe the process:

  • a guide about an individual zajist: respirator from a saw, earplugs;
  • to win from the room of all furniture. Doors from the side of the building are automatically conceived. Їх to use polyethylene for pre-treatment, even as a result of the robotic machine for cycling, it becomes a saw that penetrates into any kind of lines;
  • for an additional viewer, it is necessary to lower all the droplets of the flowers down by 2 mm for the length of the pidlogue;
  • turn on the car. Robots to see out of the distant kuta room. Move up to the opposite wall, roll up 180 degrees and collapse at the opposite side;
  • After cycling through the boards once, from the surface you see the saw, and you are satisfied. Close-up of large plasterboards with plaster to match the wood. Repeat the picture of the last cycle.

Virivnyanu pidlog is varnished, on which it is possible to lay linoleum or laminate.

Shpaklyuєmo derevyanu pidlogu

In this vypadku acrylic sealant or finishna acrylic putty. If the drop in heights is 3 mm, it is recommended to use a filler on PVA glue. The second language will be explained simply: if you want an acrylic putty and a lot of niggleness (you don’t want to get out of it, you can’t use it as you go), you can use it as a 3 mm ball. Acrylic plastering is used for small areas of pidlogi.

Finish putty on PVA glue can be used to vary the height difference of 3 mm. In such a vypadku in her pіdmіshuyut thyrsu. Incomplete technique: material, scho virivnyu, even sticky and dry. When hanging putty on it, lay linoleum or carpet. Laminate, tiles cannot be laid.

Virivnyuumo pidlog with plywood

Yak vir_vnyati derev'yanu pidlog with plywood? In general, plywood is simply fastened to the podlogi with screws. A support for the plywood є the top of the irregularities or the hvil of the dough.

However, the process is of its own peculiarity:

  • if the width of the boards is 10-20 cm long, the irregularities are insignificant, then the plywood, up to 10 mm in thickness, is completely sufficient;
  • If the width of the boards is 20 cm, the irregularities of the boards are not correct, to pass through the board, plywood is required for a thickness of more than 10 mm. It is necessary to remember that this type of plywood will be ineffective in the case of applicants due to the customary opinion. For tsiy it is possible to vikoristovuvati vologost_yky material.

The sheet material should be screwed up with self-locking screws, the sticks and seams should be sealed with an acrylic sealant. Then paint the surface. For a whole lot of vikoristovuyut carpet, laminate, linoleum. Boards are varnished when protected.

Another way of victoriannya fanery

If the vertical drop of the horizontal crossbar is 10 cm, it is recommended that the lag is victorious. Tse wooden bars of singing tovshchina. The quality of the installation depends on the characteristics of the plywood. So, you can take plywood in 12-14 mm, then crock lag is 35-40 cm.Yakshcho village material (16-18 mm), then crock lag - 50 cm.

The step of carrying out the work:

  • vikonuyut the layout of the pidlogs for the additional laser level;
  • it is a good idea. There are a number of bars, which are located on one side of one in 230-300 mm. The stench should be screwed to the pidlog. The correctness of the installation will be re-versed. If the beacons are displayed incorrectly, the scarlet ball, which is viral, will not give the ochikuvanny effect. Linoleum on such a pidlog can be taken for granted, laminate - ni;
  • the installation of the lighthouses is possible at the location of the lighthouses;
  • The installation of plywood is carried out only when it is finished. Simple, stand up, like sawing on equal squares. Installation of veneer plywood in the wake of changes (like fixing the masonry) for additional screws.

Do not forget about compensating gaps bilya stin. The final stage is the decoration process. For a wide variety of vikorist parquet, laminate, linoleum, carpet.

Screed pidlogi on wood planks

It is possible to use a wet screed if a pair of bullets is laid on a concrete base, or there are logs on the stoppers. Vіdstanі mіzh stovpchikov-pillars and tovschini itself pіdlogi, schob vitrimati natazhennya cement chi concrete rosch. Theoretically, it is permissible to be wet for wood pidloses, the thickness of which does not change 5-7 cm. The virivnyuchy material has a plasticizer and microfiber for armoring. In the first place, the screed is simply unstable, which is why the pure cement screed is not elastic.

The technology of wrapping boards with a wet screed does not appear as a classic way of organizing a black ball. It is possible to use linoleum, laminate flooring, parquet flooring or any other material for decoration.