The bathhouse is not a part of the word culture, before that, with the peace of the Victory Day, the bathhouse procedures provide immunity and health benefits. At a private booth, a little more primacy is created even more often. There can be a possession in the basement surfaces, on the doors near the viglyad, it’s worth it, or it’s worth it for a garage.

If the garage is victorious for the car and for the removal of the handrail for the living quarters, then it is possible to create a trip for the lazne, having installed the booths with the garage. A garage, equipped with a lazne with a zhitlovy booth, can be vikoristovuvatyya for a bathhouse fittings and stocks of firewood for firing.

However, it takes an hour to get the lazy to the garage, it will take an hour to build a foundation, build a wall and a day, and give a hundred financial vitrati.

You may have a spare garage on your own house, you can have a bath in two options:

  • Building a garage on two parts One of the loans is the bath itself, a friend of the vikoristan for the purchase of a car or an extra charge. Such a lodge with a garage is organized frequently.
  • Vikoristovuvati all the attachments of the garage to the bathhouse... This will not only be enough for the steam room itself, but also for the shower and room.

Important. When fixing a spa in a garage, it is important to pick it up. As soon as the temperature and the temperature of the ceglin begin to gain strength and twitching, the inner space needs to be insulated and hydraulically insulated, as it is not only necessary to take away the heat of the core, but it will be necessary to overcome the heat.

preparation of the application

First, don't start before preparing the application, it is necessary to detail the plan of the garage with the sauna.

On the whole, there is a reason for all the associated lasnias, such as:

  • Steam room.
  • The room is made up of.
  • Toilet and dresser, as much as possible.

In addition, since the plan of storage with the necessary dimensions is primitive, it is necessary to think over the provision of communes, such as an electrician (div.) And water. As soon as the spa is connected to the booth, the cold and hot water can be brought through the home system and the water supply, but the procedure is most often foldable. It’s easier to bring cold water to the hot water, and all the way around, install a hot water boiler.

ventilation flap

Important. Before Tim, how to stay in the garage with a sauna and to see the internal area of ​​primacy, in advance, think over the ventilation system according to one of the schemes shown on the little food. Have ventilation with the necessary power cables before proceeding to the internal and external processing of the appliance.

Scrubbing anger for a shower

Let's step in front of Tim, like having a sauna in the garage, you need to have a hole for the water to drain and the shower. For the whole, it is necessary to clean the drain and place the pipe outside the garage on the maybutny shower.

The pipe is guilty of being nailed for independent drainage, as shown in the photo vishche.

To create such a septic tank to fill up simply behind an additional extraordinary plastic barrel with a volume of 200 liters:

  • Vikopati, the pit with a glibinoy in the p_vtora meter.
  • At the bottom of the pit, there is rubble of the great faction with a 20 cm ball.
  • Install the plastic barrel from the rear, screwed into the bottom with openings.

Looking back at the barrel is guilty of going to the surface and closing the hatch. Upon completion of the installation, fill the empty ones near the barrels with soil, and we can prepare them for the drain.

Zovnishn garage insulation

According to the garage with the need for additional insulation, it is located in the middle (div.), So from the last part. For zvnіshny warming of the tseglyanoy wall, call for the use of polyplast, which is the best way of insulation and the cost of the material to reach low.

The insulation process is carried out by the offensive rank:

  • The walls of the garage are cleaned from the timber and the saw, then cover with a primer the deep penetration into the ball of the ball.
  • At the lower part of the wall, close the support rail, as shown in the photo. Vona will serve as a support for the first row of p_noplast.
  • Then apply glue paste on the surface of the polystyrene using a notched trowel and press it down to small zusillas. Laying p_noplast is carried out from the bottom up the hill.

Important. Zdijsnyuchi warming with your own hands, pick up the pinoplast with a thickness of 8-10 cm and put it in a checkerboard order. If the thickness of the polyplast is more than 10 cm, or there is no opportunity to install the support rail later, then in the capacity of the additional support for the polyplast, special dowels are installed, as shown in the photo below.

When laying the polyoplast on the surface, apply a wiry ball of plaster and mount a net of serpyanka, as a supplementary armourer for a ball of decorative plaster. At the final stage, apply a decorative ball, and at the end of the day, the insulation of the wall is finished.

Internal area of ​​the hotel

The spa is covered with our own hands in the garage, due to the good heat insulation in the middle, especially to the merit of the stele; The area of ​​the garage in the middle is to be repaired for the insulation of the walls.

The main material for insulation is mineral wool and foam. Penotherm - the tse of foil insulation on the basis of polypropylene. Tsei material is issued in rolls and is not only for insulation, but for hydroinsulation.

The sauna in the garage is insulated; it is repaired from the stem of the wooden frame for laying the mineral wool. The frame is made from wooden slats, which can be fastened to the wall with dowels. Then, between the beams of the frame, the mineral wool is installed, as shown in the photo below.

Important. Tovschina vikoristovuvanikh beams for a wooden frame are guilty of buying expensive mineral wool. For an hour, robots with mineral wool need to wear eyepieces, respirator and protective gloves. The frame and the mineral insulating material will be installed on the walls and steles.

As soon as the garage is located in one step, as the visonan is in the mountains, then the insulation of the stele is also necessary from the side of the hill, as well as mineral wool. When the frame is sculpted and the mineral wool is laid, the surface of the walls is insulated with foil-coated foam, which is laid with foil in the middle, as shown in the photo below.

Zakrіplyuєatsya warmer behind the aid of the wake-up stapler to the wood frame, you can pick up wood screws. Stacking the sheets of the heat-insulating machine is overlapped, and the stick is sealed with double-sided tape.

Before the house. The bathhouse in the garage is decorated with clapboard made of natural wood or polished boards. For lining, a sieve with wooden slats will be installed on top of the warmer, the yak will be raised perpendicular to the wooden frame. In such a rank, we are warmed and covered with airy spaces, like the ventilation of the tree and the fast hanging, pouring in the water steam. For the installation of the lathing, the installation of the cladding material is carried out. As a result, you have a bagatosharove insulation, the diagram of which is shown in the photo below.

Important. To install the lighting lamps, the electrical cable should be laid before the mineral wool is laid. All the cable is stored in special corrugated tubes, not only to seize the cable, but also give the opportunity to be changed manually if necessary.

At the final stage, the insulation of the pidlogi will take place. If the base in the garage is made of concrete, then it must be cleaned with a saw and smittya, then a sprinkle of balls of a primer of deep penetration is applied.

The same crocs are repeated when the walls are insulated. Only at the end of the foil, the insulation is not deposited, but instead of the new filling of the wake-up call for the recovery of the mineral wool from the vology.

Important. In order to have a sauna in a garage, only a natural tree will be stuck, as it is not possible to use small chemical antiseptics or some types of chemical leaks, and when the temperature pours in, the stench will be remembered to be toxic. For the shedding of a tree, only natural antiseptics are used.

As soon as there will be a garage and a lazy house in one step, you will be able to use the most suitable types of wood, to which are included:

  • Oak.
  • Ash.
  • Modrina.
  • Pine.

At the final stage, the installation of an electric stove, kramnichok and refinement of ventilation openings is carried out. If it is planned to install a wood-burning stove, then it is necessary to think in advance of how the dimar should be treated.