More often than not, the gentlemen are going to independently build up an apartment, a dacha, or a Zamisky booth. Such a vibration of validation, also allows you to spare the finances and carry out repair robots in the world of mobility. One of the most important awakening processes is the installation of a lag. Ale here is a winnig of powerless food, as you vibrate the correct material, through yak you put logs for the podlogs and installation rules.

Show lags

The design, which is stored from the transverse beams and serves as a stand for the flooring of the floor - the whole lag. Vikoristovuvatisya for such a design can be bars or beams, with self-laying, most often, wood is victorious, but in everyday life, such materials can be widely stagnated, such as metal, concrete, polymer. For the additional installation of the lag, you can speed up the offensive passes:

  • Adjustment of noise isolation;
  • Adjustment of heat insulation;
  • Correctly distributed navantazhennya;
  • Evidence of ventilation of the child, especially importantly, has been transferred to the arrangement of engineering communes;
  • Ideally equal to the surface of the pedlog;
  • Mint and sturdiness up to new options;
  • If necessary, the possibility of replacing the surrounding design element.

Such material, like a tree, is valued for its natural naturalness, ecology, garnishing callous viglyad.

Vibir material for lag

It is the choice of material but to lay down the quality and efficiency of the design, as well as taking into account the existing rules, lags to ensure the necessary and advanced operation.

  • For the construction, it is very cheap to use wood species. Tse can be a yalitsya, a pine, a vidminny version of a yalin. You can vikoristovuvati modrina, ale such material will cost dearly.
  • For the construction of a tree of the 2nd grade, it is not varied from 3, the material is important, it is guilty of being equal to 20%, but not less than 18.
  • It is necessary to make respect for a peretin, an ideal option, if the height is 1.5-2 times and the width of the bar is changed, in other words, it is overwhelming to the mother's straight-cut shape.
  • The same size will be found from the heat-sink, and itself - from the heat.
  • Spill over the room.

In the given table, the size of the spill is presented for small spills, for the drain, the crock will be 70cm.

razmіri prolotu

Rosemir peretin

In the case of the size of the gap, the value is inaccurate (intermediate), next to the brothers, the options of approach, ale vrahuvati stock of metsnost.

Vibir flooring material

The species of the tree must be selected to ensure the peculiarities of the primacy. It’s very important, the financial side is important, the other grade of material will cost a lot more expensively, if it’s pidloga, if it’s pokrivatisya, for example, a farboi, then you should vibrate another grade. If it has been transferred to varnish, then here is a necessary first grade. If it’s possible to settle down in the special surroundings, then you can go to the 3rd season. Yaku breed is more beautiful than vibrati:

  • Yalitsa, pine and yalin are carried to soft breeds. Also, it will not be practical and dovish, because on such a surface it will become lazy to see from heels. Such a flooring is energetic, as if attached with little transit and should be placed even more carefully before it.
  • An oak is brought to the most mint material, but such a flooring is expensive. Yogo can be victorious in any kind of attachment.
  • Another breed is distinguished by a high quality - the tse of modrina sibirska, there is great specialness, the tree is to take away tar, as it helps to keep it out of the grit, so this kind of flooring is often vicious in the open air.
  • And for the oblastuvannya of childish pretenses, it is ideal for a vilha, or for an osika.

When choosing, it is necessary to brutalize respect for the tree's health. As soon as the material is victorious, then at the end of the day the flooring will dry up, and the cracks will disappear. And the axis of overdried material can give shilini. It is ideal to become 12%. It is necessary to respectfully look at the material, not to pick up defective doughs. Kupuvati material treba with a 15% reserve.

The tree is a douchey and old-fashioned material, but for this it has proved itself in operation, it needs to be covered with it. It is possible to get infected with antiseptics, as it can save the village from fungi, fungi, flowers and beetles.

Yak rozrahuvati vіdstan

From that, like a flooring of the sides, if there is a crock lag. Here it is followed by such a rule, as if the flooring is thin, then the lags are guilty of being removed from the minimal installation. If it is ok to work with it, the lags will change very quickly.

In order to know the exact data of the country, it will be necessary to carry out the next steps.

For example, the є room is 11m wide, the logs are 0.15 m wide, and the backsheet is 25mm wide. If you follow the tables, then you will see the lag from 40 to 50 cm, then take the average indicator, which will be 45 cm.

Lagoon number of lag is not known, it is known - x, depending on the width of the back lag number is 0.15x. So, as the first lags are laid out on the side of 30mm from the wall, the meaning of the next step is x-1, but the distance to the wall is 0.45 (x-1).

Mayuchi takі danі can be put down to the rіvnyannya, watching the advancing rank:

11 (dan kimnati) = 0.15x (dan lag) + 0.45 (x-1) (croc lag) + 0.06 (seen from the wall).

It is necessary to know x, in this case, the number is 18.9, so the value must be rounded up to 19 - the whole number of lags. Dal it is necessary to know the sum of all views. For tsiogo 11-0.06-19x0.15, walk 8.09m. If you want a sum for a number, go 44.94 cm - it will be more accurate, which is guilty of being lagged.

Such exact rozrakhunki vikoristovyutsya to finish it is necessary to carry out it is not necessary, it is possible to speed up the given tables. Even when you set the lag on the end stage, you will not see a troch, nothing terrible in the whole dumb, you can make a crochet less, the design itself will be better.

visnovok

Yak can be pomited, when the pidlogs of the skin stage are important. It is necessary for the skin process to come to respect, if only if you follow all the recommendations and follow the rules, then the installation of the training will not bring difficulties, and the result will be excellent and reliable.