Get the garage from the metal profile with your own hands to force the skin householder. You don't need to know any specific tips. It is enough to vivchiti technology and dotrimuvatisya її main vimogs.

Also a garage with a metal profile

A garage with a metal profile - a machine for parking a car. Win not vimagaє tough foundation, great financial vitrates and wake-up tips.

Metal profile - steel sheet profiling, coated with a polymeric ball. Material vikoristovuєtsya for lining walls, partitions, fences. For the shedding of іржі, the sheets of the metal profile are chipped with zinc or alumina zinc coating. It is sometimes used for alumosilicon, protects less stiyke up to new injections. The best zinc oxide is aluminozinc.

Фахівці vvazhayut metal profile with the most beautiful educational material for the building of malikh budіvel. Among the main passes you can see:

  1. Installation speed. There are a few days for the maintenance of the garage with the metal profile.
  2. Ease of comfort. Budivelnyk may not have mother-specific tips, it’s enough to follow the basic rules of buidowel.
  3. Minimum material and robustness. If you happen to be able to hire a professional for the maintenance of the garage, the service will be much cheaper, but not with the built-in equipment.
  4. Dovg_chnost. The metal profile from the good polymeric coatings can last up to 30 rockets.
  5. Mobility. If necessary, the construction of the metal profile can be dismantled and moved in the middle.
  6. Non-flammability.
  7. Metal profile is a light material. The managers of the whole wines can be victorious for the stay of the team-hour wake-up call at the work, de-operation of the capital garages is fenced off by law.

However, there are some shortcomings:

  1. Possibility of deformation before an hour of impact. If you want to turn the archway, the first viglyad is ill-advised, you must change it.
  2. Weak heat conductivity. The garage from the corrugated board is even colder. The problem is to look for additional internal insulation with the equipment.
  3. Allowing the noise for an hour before the board. You can have fun with the help of the insulating materials.

See garages: photos

On the houses it is possible to lay and metal roofing. Roll gates can be installed outside of the day.

Vibir materials

From a glance, a kintsevoy rescuer, a metal profile - a corrugation of a metal sheet, seepage by a pokritty. When choosing materials for the maintenance of a garage, I respect the markup:

  1. The letter "N" characterizes the building, which it does not carry. The metal profile with such a mite is perceived as the great breadth of the leaf and the height of the sickle. Additional furrows increase the hardness of the material.
  2. "НС" is a priceless metal profile, which I can averagely use and the amount of sheets.
  3. "C" - professional flooring. Vikoristovuєtsya for cladding of building walls.

The metal profile with the "N" brands will get involved in the hire, that is, when the garage is built from scratch, it will be victorious.

The numbers, affixed to the markup immediately after the letter, indicate the height of the hvili. This indicator can be from 8 to 100 mm. It is also worth talking about this material.

For example, the parameters of the N-75 sheet are as follows:

  • The thickness of the sheet is in the range of 07-10 mm.
  • Boundary navantazhennya per 1 square meter of sheet - from 9.2 kg to 12.0 kg.
  • Khvili's height - 75 mm.

Rosrahuvati is a bit of a metal profile, as it’s easy to know when it’s going to be, it’s even easier to get it with the size of budovi. Dovzhina wakes up to the width of the arkushi. The height of the garage is from the foundation up to the length of one sheet. Purchase material, next to the set date, 10 pieces are needed - the price is necessary for overlapping sheets.

In addition to the metal industry, the business process needs to know the following materials, tools and accessories:

  1. Frame pipes.
  2. Uteplyuvach.
  3. Tools: screwdriver, drill, nippers, pry, shovels, toolbox for replacement.
  4. Vitratniks: screws, profiles, sand, crushed stone, cement.

I will be a garage with my own hands

Before buying material and cob, it is necessary to know and clean up the maidan for the maybutnoy awakening and on the floor of the chair.

Vibir and preparatory work

When choosing a maydan for the maintenance of the garage, it is necessary to carry out a proper care and efficiency. As well as it is a good idea to go for a well-being or an alcove, for a garage it is possible to add a little house. The main vimoga is the speed of the transfer before the arrival of the car.

In the ideal line of the garage door, the culprit is one of the lines from the line fence. Tse guarantor of a non-pereshkodny trip of the car to the street, which is not allowed to be fenced off on the street.

With the help of the economy, the garage from the metal profile can be arrived before the next day. In such a case, it may not be possible to have one of the walls, but through the adjustment of the noise performance of the material, the arrival does not need to establish order with the living room.

For the maintenance of a garage, it is not possible to select a place with a friendly earth. Under the hood, one will think of a bit of organic speech, as a result of a powerful change in design.

The vibrancy of the muscle is cleaned up from the moment and the overgrowth and is being displaced for additional shreds, fittings and motorcycles, as it is possible to displace all sides of the garage.

Folding armchair

The chair is built from the meanings of all sizes and materials not to the obsessive mind of building a garage, protest to people who do not mind the robots at the wake-up call.

At the chair, you can vkazuvati all the characteristics of the maybutny budovi, including uhil dakhu and visotu pidlogi. Standard garage parameters for one car:

  • Dovzhina budіvli - 6 meters.
  • Width - 3 meters.
  • Visota stin - 2 meters. More than a meter, more than a fall on the back.

The chair will have all the details

When the armchair is opened, it’s going to be a memory, so that a part of the inner space can be taken away by the insoluble materials.

For small mobile garages, there will be enough space for the armchair of the "box" itself. There are two schemes for storage:

  1. Armchair frame awake.
  2. Sewing armchair.

At times, when a stationary Budova is being built, it is possible to stand on a permanent place, you can also add an armchair to the foundation that oglyadovy.

The width of the pits should lie in the dimensions of the car.

  1. The surface is fried with a sip. Guilty but the bottom of the walls is about 10 centimeters.
  2. A damper line is fastened along the entire perimeter of the foundation. There is an overshoot of possible deformations of the pidlogue when the temperature is too low.
  3. A ball of hydraulic insulation should be placed on the fouling and ramming of the sands. For the whole period of time tovsta iz polyethylene or ruberoid.
  4. Reinforcement mesh is laid on the hydro-insulating ball. Diameter of rods - 10-12 mm.
  5. Pour concrete on top. The surface is ready to be adjusted by the rule.

The pidloga is liable to dry out. For the whole, there can be three types.

Video: Pouring concrete pits in garages

To the frame

Є two main ways to mount the frame:

  1. Zvaryuvannya to the frame with the offensive fixing on the prepared maidan.
  2. Mounting of support stays with further installation of strips on mіsci.

The guilt is due to the design:

Elementi dahu kriplat okremo

At the first option, the frame is selected from the basement. All the elements are quickly processed from an earlier breakdown plan, they are divided into one by one. Zibrana konstrutsii stand on the foundation and fasten for additional screws. In some construction, climb behind the outer blocks without the middle on the foundation, at such a drop, the blocks can be fastened or fastened with old screws.

Another way to get involved in the foundation stage at the stage. For the installation of supporting st_yok on the depth of freezing to the ground, pits are made. For tshoy can be victorious, an extravagant garden drill. At yami kutovі stіyki arise. Smells vyvnyutsya behind horizontal and vertical lines and vvazhayutsya standard. Along them, there are vertical stripes, the top of which is guilty of establishing one horizontal area. Then the pits and the striking foundation are poured with concrete.

The number of vertical lines to lay in the size of the garage and to the type of metal profile, so that it becomes victorious. In the middle, 2-3 supports are sufficient on the skin sheet, with the support between them 0.6-0.8 m.

In this way, the support is installed from three sides, the fourth is needed for the installation of the gate. For the backing doors, it is enough to have two simple chotiric frames for chairs, stand on them and on the extreme stiles of steel hinges and to adjust the design. If necessary, additional stiffening ribs are added.

In addition, you can start to mount the upper and lower strapping and horizontal strips before installing the razchin. Stink up to the vertical supports with the help of the support of the self-support with the bend 0.5 m from each other.

As soon as we plan to take care of one-sided dahu, one of the sides is trying to get away with it. Dvoschiliy dakh vimagaє storennya to complete the folding crocodile system.

Video: Folding the frame at a fast pace

Installation of metal profiles

Installation of a profiled sheet is the simplest stage of folding a garage. The corrugated board is built vertically, so that I can easily get rid of the water.

Yak krypilny elements vykorystovyutsya self-rims with a gummed gasket. Wonderfully close the openings, not flabby leaves and victories that are found in the middle.

The robot will be able to see the steps:

  1. Installation of the first arkush. Win up to the kutovoy style for the help of self-driving screws and screwdrivers. The upper cut can be fastened together, then the entire side, for which it is possible to sew the metal profile along the entire perimeter. The middle is between the screws - 30 cm, or "through the hvilya", behind the vignette of the rest.
  2. Installation of offensive arkushiv. The installation is "overlapped" with one hvilyu. Two sheets are attached to the frame to the frame, and the sheet must be sewn behind the profile. The rest of the hvilya zalishaєtsya vіlnoyu and clink with the advancing element of the sheathing.
  3. Important step - sealing sticks with sealant... It is necessary to change the price, the water did not drink in the middle.

Video: Attachment to professional flooring

Installation of coverings

Dah garage with a metal profile can be one-heal or two-heal. It is necessary to pay attention to the stage of the project in Budovi. As soon as the garage is primed until the last days, it will be covered with one slope. Yogo uhil maє buti not less than 8 degrees.

System elements are set up ok

Installation is viewed at the last stages:

  1. Folding the frame to the frame and the crate of the cover. When oblastuvannі dvoshilim dahu krіpіlіvі krokvyanі bet, feasible with metal mowing. Їх number of roads for the number of vertical supports.
  2. Stacking sheets. Installation is overlapped with one chvilyu chi 20 div. Sticks are filled with bituminous sealants. 30-40 centimeters in the metal profile should be placed over the edge.
  3. Covering metal sheets should not be fastened through the needles, as in the current version, but on the skin needles. Get rid of the screws with the gummed head, so that you can dry the openings and do not let the vologue pass.

Video: Editing odnoshilim dahu

Warming and cooling

For insulation of the garage from the metal profile, a glass or mineral wool is used. It doesn't matter if the minvate is victorious, I won’t get it. The process of warming and processing is carried out as follows:

  1. Mothers are welcome. Tovshchina - from 50 to 100 mm.
  2. Thermo-insulating pivot is ready for use. Vaughn does not allow the heat to flow from the condensation.
  3. Wadded mothers should be fastened between the vertical strips of the frame. The price can be zrobiti behind the additional strip of chi with special glue. A similar rank is used to insulate the gate and cover sheets.
  4. Yak internal decorative coating can be applied to thin sheets of aluminum or corrugated board. It is recommended not to build up a problem if it is too early, because there is a risk of condensate accumulation.

Minvati sheets are spaced between vertical supports to the frame

For insulating the garage, it is possible to use roll material. Yogo installation of vimag in front of the front installation of the rail frame. The transverse strips, metal or wood, should be fastened to the head frame at the end of 50-60 cm.

Video: Yak insulate a garage for robots

A ready-made garage from a metal profile is equipped with an anti-corrosion headlight. Tse advises the term of the service.

Dotrimuyuchis a number of awkward rules, you will become the master of the vlasny garage with corrugated board. For consumer wines, it is easy to change from the main store, the warehouse of the state house.

Pomilka: the herd is not іsnu! (ID: 5)