The leather classmate knows about those "sores" of the car in two cars: in the motor drive and under the bottom. You can reach the engine by opening the hood. And the axle is supposed to pidvisku or to take the transmisyu, not having climbed to the body, not going.
For a vikonannya robot from the bottom of the car, you can speed up the pit, the driver or the other. The pit can be covered only in dry soil, which may not be available in garages.
Pidyomnik - the road is happy, as you can only allow the repair of the main line. As a result, for an ordinary car enthusiast, there is no need for a self-contained trolley for a car, as it will not require great vitrates and an hour for picking up.
The statistics show the most popular and available for the design of the design, as well as the detailed description of the process of design and installation.
Main types of car parks
It is essential for the budget and for the folding of repairs, there are two types of rear structures:
- Only one place of the car is allowed (front or rear).
- Povnorozmirni (rozrahovani on the entry of all cars).
The first option is economical and efficient. The mini-walkway for a private trip is small in size and in a wagon. It’s easy to get up on the pivot maidan and pick up for the completion of the repair. The main shortcoming is that it is not so smart in the robot, as the design is oversized, the odds of a car here do not change 50-60 centimeters.
The single-format option is more expensive and foldable in implementation, albeit giving autoclassians one-hour access to all body units. Apparently along the way, right in the form of a seat, for a good readiness it is necessary to build a chair, and when folded it is exactly to show the dimensions of the design.
Three groups of sizes are especially important:
- height and width of the supporting pedestals "style";
- dzhina ladder (v'їzny and horizontal);
- the width of the ladder.
Krym tsyogo, I have come to respect the vuzliv sticking traps with pedestals. Smell guilty showcase the car without deforming.
Popular options for auto repair
The simplest view of the mini-estakadi - two bets of those who have been knocked out in addition, buy samples of a wooden beam with a repetition of 20x20 cm.
Photo 1. Two pieces of timber - the easiest way to fix them for repair
The shortcomings of such a support are obvious: on the beams there are no sides to the side of the lateral movement of the wheel, but the visualization of the water of the borderline accuracy when entering. There is no backward "vidbiynik" here, which is like zapozhit vypadkovy z'yizd. The height of the margin is not sufficient for manual access to the bottom.
Isnu more detailed options for wood support for simple repair robots. This is a fast track at the dachas to wiggle out of the boards, afterwards to wedge them into a wide shield. One of the sides has approved the steps for the trip (photo # 2).
Photo №2 Міні-міні-міні-path with obrіzkіv boards
A design is given for a removable bar and two straps for transferring. The width can be vibrated so that you can look around the car without the rizik to see the wheels. Partiality and flexibility in preparing for the minimum delivery.
Most often they produce metal from profiled metal (pipes, coil and fittings). Stinks of dovogovіchnіshі and mіtsnіshe trees. The buttstock of such a design is shown in photo # 3.
Photo №3 Pidstavka-festakada z kutochka
It is possible to replace the coil for the supporting part of the ladder, you can use the reinforcement or the pipe. Having extended the horizontal ladder by 1 meter, we can make a bigger hand for the robot mini-e-walk. Vikoristovuchi її, it is possible to reach a large part of the aggregates, rostasvanih under the bottom of the body (photo No. 4).
Photo # 4 Podovzheniy Variant
I will finish looking at the compact design of the mini-walkway for the car of the open type. Vona borrowed from the industrial position with portable and stationary options (photo No. 5, 6, 7).
Photo №5 Portable steakade in the selected viglyadі
An important feature of the design is the ability to dismantle the horizontal ladders from the car for easy access to the wheel arches and thresholds.
Photo №6 Variant of the private building of the building for the first one part of the body
Photo №7 At the rozіbranomu viglyadі there is an unversal road to get into the garage
Pratsyuvati, lying down or sitting down by a car is possible, but not even by hand. In addition, for regular repairs, it is necessary to have a stationary overhang of the treadmill, selected on a hundred and part foundations (photo # 8).
Photo # 8 Stationary autostack with metal on concrete base
Such a design, if necessary, is not only a passenger car, but also a small amount of vanity or a bus.
How can I create a self-driving car seat?
The preparation of the design is to be repaired with the folding of the report chair. Rookie yogo, you can vrahuvati and think over all the steps of the collection, having eliminated the mercy that hastily ruled by the viconan robot.
Rosebirna eakada is guilty of the mother of such gabarity:
- Dovzhina v'їznogo and horizontal ladder for the car + 1 meter.
- The width of the ladder is at least 40 cm.
- The height of the supporting pedestals is 70-80 cm.
- The width of the upper part of the supporting pedestals is the width of the ladders.
In order to create a fast food store, it’s not a waste of money on metal. For ladders, it is necessary to buy an equal length coil of 63 mm. The supporting pedestal "stile" can be welded into a coil with a police width of 50 mm. Zapovnennya ladders are robbed with corrugated reinforcement with a recess not less than 14 mm.
Without a device, a grinder and a drill, it is more beautiful to get started. In addition to the folding tool, it is necessary to prepare 12 pairs of bolts and nuts for fastening the ladders to the "chairs".
Etapi robots
The first croc is the preparation of the supporting pedestals. I need to put on a trapezium similar to the form for the adjustment of the stiffness. For an accurate folding of the upper part of the "style", it is necessary to lay out the layers on the OSB plates behind the size of the cut;
The bottom part of all the supports is ringing. We use to pick up the frames of the upper majdanchiks and attach little to them. The conclusion of the stage is the installation of the upper frames with the legs in the lower supports and fixing them to the joints.
Beast to respect, but on the storage scheme, one of the top frames will turn the police up and down and set the file for the capture of people from the front. On the end supports, it is necessary to weld one each of the outer jacks. The stench will not let the car go out of the gangway.
In order to make the gateway with your own hands as stiff as possible, you can stand on the cross link from the steel profile. Yogo bolted to the pedestals. Tsey zhіd will not be busy, I will not be able to improve the rigidity of all designs.
The horizontal and vertical ladder is made of 63 mm coil and reinforcing rods to play the role of "drabink". Dovzhina of a stolen gangway for a passenger car is guilty of being at least 3 meters long. The size of the horizontal dilenki is vibrated by adding 1 meter to the car. The width of the ladders is not less than 40 cm.
Before installing the reinforcing rods, the coils are turned over so that their shelves were amazed up the hill and served as inviting bolsters. "Drabinka" is seen in a ryvnoyu, where the profile is placed on a firm horizontal platform. Prikrіpiti yogo to concrete or asphalt foldably. It is possible to vikoristovuvati in the position of the mounting base two transverse coils. Before them, direct the "drabinks" to fasten with clamps. Having completed the operation, you can fix the process of engaging. The shape of the profiled reinforcement will be quick to display, the vikoristovuchi yak pattern is 63 mm.
Preparing a stolen ladder for repairing a car On a new one, it is necessary to add a 10 cm (without reinforcing rods) vilny kinets (without reinforcing rods), which will serve as a sticky university. The vertical edge of the profile is cut by the Bulgarian to the horizontal police. Writing it is necessary to visonati zagin stikuvalnyh resht.
If you don't have a lot of bending verstat, and a couple of friends of a solid carriage, then ask them to climb onto the curbstone, schob to counter the zusilli zagin. Before the central operation, it is necessary to lay the ladder horizontally, to support it. In the supporting part of the profile and the cork of the "style" behind the wall, drill two openings. Having fixed the "drabinks" with bolt-ons, and from the Zusillas, they will hit them down to the ground. At the same time, a de-bursting profile, it is necessary to weld a piece of steel plate to make the university stronger.
Mount the horizontal ladder, placing the yogo on the pedestal. If you want to drill, open the bolts in the non-loose coils and the upper support profile of the pedestal. For more over-the-top fastening from the road to the Maidan to the “chairs”, you can weld on a vushka. Having fixed them with dowels to the concrete or with steel dowels to the ground, you can make sure you see the parts of the driveway when you drive a car.
Rookie tryna go, brutal respect for the abduction of "Drabinka". As soon as you sag, then it will be possible to build up two industrial supporting frames and fasten them with bolt connections to the cuts.
