Most of the auto-graders are quick to think about the maintenance of a garage for their own transport means. There will be a garage for a long time, before buying a car, there will be a need to make a "booth" for your car, being already a car enthusiast with experience. A garage is necessary for a car - it will not collide with the cim. Є, obviously, as an alternative to the possibility of securing a car to the type of paid critical parking lots, but the problem of stinking is not suspected - in the first place, it is expensive from the financial point of view, but in a different way - a parking lot, there is a parking lot і - oil doesn’t mean anything, go , just stay on someone else's territory and pay for the price. Surely, not all car students can allow themselves to stay in the capital warm garage with an oglyadovoy pit. It’s expensive, expensive, it’s possible to hire a budget and technology. It’s a matter of considering from the garage through those who don’t pay pennies on a monolithic foundation, and it’s not easy to pay for robots and awaiters. Tim has more options. One of the simplest, most inexpensive, and at the same time from these other options is to build a garage with a metal profile with your own hands.

Garage with metal profile: plus and minusi

  • The first and the most efficient way is the surprisingly cheapness and simplicity of the design. The garage can be self-contained with one or two neighbors stretching out decilkoh days.
  • The term of service of such a warehouse garage is close to 30 rocky - it’s impossible to build such a fast and inexpensive building.
  • A garage with a metal profile is not required for construction, it is aesthetically pleasing and adorable.

Alas, unfortunately, such a garage will not provide enough safety for your car, as the locks are easy to see, and the thin steel sheet is not in the warehouse of any difficult to create. And if such a garage is not located in a private house, or it’s dumb on the territory, it’s safe to be protected, then you will get some information about the installation of signalization and those additional cats to capture all the villains.

Kilka will gladly choose a vibor mice for a garage on an adjoining dilyantsi

It’s not easy to put up to the choice of a mice for a garage - it’s easy to use a rapt on the kind of dilyantsi you look like in the future, the altanka will be more beautiful, for it’s more beautiful than the go-ahead for the state budget. One of the head vimogs is that the visit of the car is not guilty of any overshoot. The ideal option is to replace the garage in such a rank that the gates were located on the same line with the parkcan. This is the rite to ensure that the car goes directly to the street.

Good, it's possible to attach a garage from the metal profile to the next day, which is located on the road. This is how you can spare the life of the same week. Don't let the garage be built up to the living room, so you don't have to let the household go with the sounds of a powerful engine and the smell of mastic materials.

Garage with metal profile: armchair

The armchair of the garage 0 is neobov'yazkova, ale zrobiti yogo bazhano, especially the armchair is familiar to people without serious warning of awakening robots. In addition, for the help of an armchair, it is not important to develop a number of awakening materials and resources.

Bottom, we can see a number of options for a garage chair with a metal profile, which can be faster in a ready-made view, so it can be used as a basis for your project.

Vibiraєmo metal profile for garage

For building a garage, a metal profile of the PS brand is known, and C - scho means "stinovy". For example, "PS 30" є we stand a profile with a height of 30 millimeters. Chim more than the height of the hvili, tim more leaf to the profile, and the price, obviously, vishche. Do not be sparingly sparing and cheap profile of the brand C 8 or C 10. It is necessary to further secure the frame to the frame, so that the leaves do not "walk", and the tightness of the design will break down at all, and a thin sheet will be damaged when it is fresh. The thickness of the sheet to the corrugated board should be adjusted from 0.4 to 1 mm. For the garage, it will be up to 0.5 mm.

Creme, vlasne, professional flooring, will be necessary:

  • Reinforcement for pouring the foundation into concrete.
  • Rolled metal: rolls, profiled or round pipes for the frame and collars. Wooden bars.
  • Samorizi for metal.

Z tools:

  • Grinder, metal circles.
  • Zaryuvalny device.
  • A screwdriver or a drill.
  • Knives for metal or an electric jigsaw for the development of a profile (through marriage it is possible to vikoristovuvati a small grinder)

Yak to build a garage with a metal profile: stages of alarm robots

Attach the foundation. More beautiful than anything else is the foundation of the garage near the monolithic plate, as it will also serve the old man in the primacy. The robot itself is awkward by its very nature, it is entirely possible to wade into the field, or to be able to catch the concrete for about three times.

  • Installation of the frame. Construction of rolling from metal rolling: channel bars, pipes and coils. When there are a lot of vertical lines, they are installed on the stage of pouring the foundation. All other details are welded to the weld. The term for the installation of the frame is 2-3 days.
  • Installation of sheets of corrugated board. Nichogo folding: the sheets are cut with a jigsaw, with knives, or with a Bulgarian, for which they can be fastened to the frame with self-tapping screws for metal or aluminum rivets.
  • The robot takes a maximum of two days for the fate of two or three people.
  • Installation of garage doors. The frame is covered with metal cuts or channels, sheathed with a metal profile. The robot borrowed no more than two days.

foundation

The first stage of awakening robots. For pouring, it is possible not to check the concrete as soon as it is caught, but immediately to start before the finalization of the buildings.

For a cob, the majdanchik is raised in the garage, and the ball is visible to the ground for a depth of up to a meter. Sip the bottom of the holes with a clean squeak, clearly let the sip. Pislya tsyogo gotuyut dimplenja for vertical stays of the frame. Before the speech, the vertices for the stiles, poured with mint concrete, play the role of palms on the foundation, but it is very easy to move the stiffness to the winter heaving of the soil. The depth of the drill holes is 50-70 cm. Dali along the perimeter of the foundation pit, set the timber formwork.

Lay the reinforcement rods with a cross-thread of 8-12 mm with a crochet of 20 cm across the foundation pit, tie the reinforcement mesh with a dart. At the same time, it is possible to vikoristovuvati a special slider or a special clutch.

Yak to ring the reinforcement, you can see the offensive video:

At the top of the hole, there are stitches, the lower part of which must be covered with bitum mastic in front of the front. The stripes are displayed strictly for the level and fastened with rasters. When the ball is poured into concrete, it is the rule.

garage door frame

Leave the holone and pick up the concrete, you can pick up the frame. It is possible to break it both from a metal coil or from a profile, as well as from wooden blocks. For fastening bars to vertical strips, weld steel plates with holes.

On the cob, they will draw the material of the necessary dozhina. Then weld horizontal cross-members from three sides of the frame. Dah the garage from the metal profile is the easiest to grow odnoshilym, from the ear to the back. The most simple option: weld horizontal crossbars to the protruding stays, on which a wooden crate is installed. It is necessary to realize that in the region there is a lot of money to be collected, the crate is required to be successful, or to create a double degree.

The frame for garage doors is covered with a metal coil. The material is drawn down to 45 degrees, the frame is welded, for which metal coils are welded in the cuts for additional stiffness. In quiet places, there will be known locks and weld metal plates.

To the front stays of the frame, weld the loops, so that the ready-made frame is inserted and split into a new place for the outer loops. If you transfer the garage gates to an ignorant one, weld the hinges with such a rite, you can't know.

installation of sheets of metal profiles

The frame of the garage can be sheathed only if concrete is caught. The price is necessary in order not to damage the vertical lines of the frame and prevent the deformation of the sheets in the profile. The sheets need to be mounted vertically, so that they will not be able to move along the walls. The material should be overlapped in one leg, but it is necessary to make sure that the material is lashed to a certain extent.

More and more quickly replace the narizan leaves - you can help to spare the hour and continue the term of service to the metal industry, so as at the plant I sprinkle zinc and farbi with a ball.

The garage will be repaired with the casing of the wall. The first leaf should be set in such a rank, so that it lies as close as possible to the lower edge of the hvili to the stile, so that you can also eliminate injuries in the process of robotics.

Sheets of metal profile should be fastened to the frame with self-locking screws for metal with a gum gasket behind an auxiliary screwdriver or an electric drill.

In the first place, the upper kut is fastened, then the entire sheet along the perimeter, except for the stack of sheets. Then put an overlap on the offensive sheet in one needle, screw the screws into the piece, for which to attach the metal profile to the other pieces. With this rank, I will sheathe the walls of the garage. In the process of installation of the metal profile, quilts are required, the upper cut of the leaves mintly lay down to vertical stripes.

The robots for the installation of the dachu are repaired by installing the planks and the drain. Hooks for troughs and troughs will be installed in the first place. Along the entire perimeter of the dakhu, there is a winding plank, which is a bend down to 90 degrees of steel sheet. Yogo sign - overshoot the hit pid dakh fallen. On the lower edge of the dakha, the window is set so that it sank into the trough.

On the frame of the sheet metal profile, they mount the bridging of the garage axis for securing the gutter. A sheet of corrugated board is placed on top of the windshield and wrapped around the edge of the dakha, for which the windshield is fastened with screws to the wood crate.

Insulation of a garage with a metal profile

Well, the axis and everything, your garage with a metal profile is practically ready. Alle, you get trimati in a new car of a round rik, if you need to have some basic insulation. Robit the price does not need styling for securing vlasny comfort, but for this purpose it is necessary to preserve the car from the temperature drops. It is not necessary to try even harder to open up the room temperature in the middle of the garage. Most often, during the winter hour, the temperature in the middle of the garage becomes from -1 to -5 degrees Celsius. When the temperature is high in the garage, it is even more unpleasant to get used to the car units - if it is -25 on the street and +20 in the garage, then, when you leave a warm garage, you can give your car parts a high temperature drop, too.

Insulate the garage better at once during the process of building, if the insulation is already in use, the garage is not a problem.

Vibiraєmo heater for garage with corrugated board

Our vipad has the most popular heaters є:

  • Materials based on mineral fiber. Sold in rolls or slabs.
  • Polystyrene in slabs.
  • Ridky polyurethane.

All materials may be yak plus, as well as minusi.

Simplest and inexpensive option. Stick the polystyrene boards directly on the metal profile, then wipe it with awesome sums. In short, such a method of warming - the plates are rotten to stand up to the mechanical navanazhennyam, it is easy to get busy, and it can also be developed into a strong sinter and when you see toxic speech.

mineral fiber plates

Naykrashche for a garage with a metal profile yak heat-insulated plates from basalt fiber. The whole material is even better heat-insulating characteristics, more ecological and not to burn, but it is even more important for the environment in which a car is located. The temperature of the melting material is 1000 degrees Celsius.

A single serious shortage of basalt fiber slabs is a building to absorb water, therefore, during installation, it is necessary to add a ventilation gap in the decilka milimeter. Circulating after seeing the heat-insulating machine, I’ll get the condensate on the inner side of the sheets of the metal profile. The plates of the heat-insulating machine are installed into the frame from P-sub-profiles, fastened to the wall.

If the insulation is carried out during the maintenance of the garage, then the heat insulation is more beautifully installed on a special thermal profile, as it is transformed into cold conditions.

Ridky polyurethane

Chi is not found cheap, but even more efficient and effective technology of insulation. The heat insulator is applied with a suction ball on the surface of the wall, at the same time there is no need for any welds or shields. Rigid polyurethane, crimson insulation, viciously becomes noise-, hydro- and vapor-insulating, which can be used when metal is insulated. Polyurethane is not less than forty years old.

If you want to insulate the garage door with a metal profile, then for a whole lot you will need to re-insure all thermal insulation materials. We are not guilty of the problems of the insulation of simple ones. Also, in the capacity of a heat-insulator for a dahu, a plate of mineral fiber is used, the ball of the heat-insulator must be sealed with lightweight material, it is possible to pick up plywood or fiberboard.

Yak bachimo, in the future of a garage with a metal profile, there is not a lot of folding and all robots, crims, mabut, healthy ones, you can at all be victorious with your own forces, sparing at every hour and every time. If you do not have the capacity to independently engage in awakening robots, you can buy a ready-made garage with a metal profile, the price for whatever varies depending on the size. So, a garage with dimensions of 3x4 meters will cost approximately 55,000 rubles, 3.5x 5 meters - 70,000, and 4x8 meters - 135,000 rubles.