You can build a garage from a metal profile with your own hands, vitraising all robots close to a month. For the most efficient use of steel profiles and galvanized steel profiles.

1

Booths with a metal profile є with an extremely light budget. To do this, it stood out on the ground, it was enough to build with your own hands the stitching foundation of a dumbbell-type head close to 0.4 m and a width of about 0.3 m. not foldable). If you want to make sure that you need to clean up the base for the booth, install the frame, mount the walls, and then carry out the insulation.

The office building for business is as follows:

  1. Razmіchaєte land nadіl, de vie plan to build a garage with a metal profile.
  2. Approximately 50 cm see the runt on the dilyantsi, vikonuєte virivnyuvannya tsiy maidanchik. Warm up, water and tamp down.
  3. At the place designated for oglyadovaya pits, rob the foundation pit. Vibrate the yogi, and take the width 200 cm more for the width as your oglyadov pit (just fill in the area of ​​the skin from the sides by the meter).
  4. The pit must be virivnyati, put in a new ball of the pisto and utrambuvati.
  5. Bazhano, all at once, to build up with his own hands a special drainage system. Pipes for the introduction of groundwater are recommended to be installed in the zliv, a ditch for drains, either in a water place, or on a dilyantsi or a hand with it.
  6. Along the perimeter of the budovi from the metal profile, rob the shape of the line foundation. For cich purposes, use the elementary attachments - a cord and wood spikes. With this help, besides, rob the layout of the walls (oglyadovy).
  7. Pidstava is the most efficient from concrete blocks (the stench is on sale in any alarm store, with your own hands it’s not a big deal). Mіzh itself takі virobi admit the standard cement-food roschin.
  8. Robust concrete blocks or quiet concrete blocks.
  9. Yak only the foundation is caught, then the hydro-insoluvates from the lasting side of the wall are oglyadovy. Expertise to pick up vikoristovuvati rolls of virobi to get rid of water and bituminous mastic.
  10. Rip up with a sound (the whole process is called a ringing jam).

Linear foundation for a garage

Your garage with a metal profile having trimmed its own base. Now you need to use your own hands to scrape the pidlog (without a booster and for those around you). Virіvnyayte land pіd maybutnіm pokrittyam for pіdlog. Let's drink the ball on the ground. Take yogo height 0.1 m lower behind the wall. Fix the damper line around the perimeter of the log, as during the operation of the garage, it will guarantee the invariability of the geometric parameters at seasonal temperature fluctuations.

Put the hydro-insulating roll material on the ball (let it stick to a high-quality polyetylene roll or ruberoid). The guilty one goes 15-20 cm on the base. On top of the hydraulic insulation slides of space (with a crochet of about 15 cm), the mesh reinforcement virib and poured with concrete construction, to which it is possible to add a polydimensional warehouse or a slope for the adjustment of water resistance and plasticity of the screed.

For help, the rules are validated and checked for 20-25 days. Over the course of the period, the screed of the auto-booster with the metal profile will dry out.

2

Your garage from the metal profile is guilty of the mother of the above "skeleton". You can call Yogo with your own hands from the P-like metal virobes. Between steel elements, it is necessary to use universal screws. On the walls, pick galvanized profiles - professional sheets with N-75 markings. Such material will be sufficient (no more than 1 mm), the needles are 7.5 cm, and they are ready for use (up to 12 kg per square meter of leather).

Frame from P-type metal virobes

To stay the "skeleton" with your own hands awkwardly in a short hour, using the guided diagram:

  1. Use knives for metal profile virobi on the shmat of the necessary geometric parameters.
  2. On the flat surface, pick up the skeleton of the side wall of the car, then skip to the trimmed design.
  3. Place vertical stitches. You need to mount three pieces per skin profile.
  4. Select the same style (bichnu) in the same way.
  5. The front wall of the auto-booth, like we can do it with our own hands, is constructively folded from the pediment to the rami for the doors (the form is straight-up). Ramu bazhano dodatkovo feasibility. For the whole it is necessary to insert two profiles one into one.
  6. The back wall is one of two forms. As soon as you have gone, you will have a garage with a one-of-a-kind dachom, but in the future you will be afraid to be straight. And from if the roofing is built with two grapples, to such a rectangle it is necessary to add the pediment from above.
  7. The frame is designed to be built from two parts. Smell of identical parameters. X visoka rigidity is provided with special ribs, which may be at their own diagonal order.
  8. The "skeleton" of the garage will be on the ready-made basis. Yogo slid obov'yazkovo fixing on the foundation with flowers with dowels and metal coils (you can do it additionally vikorisovuvati and samorizi).

Our garage is practically ready-made from metal profile. It is necessary to cover him with the above-mentioned dakhom. Ї Robіt іf Profіlіv. Їх it is necessary to select the auto-booth and to make the mows according to the configuration. For the fixation of professional worms on the coatings, the same screws are used.

3

Car booths with metal profiles can be used not only with equipment for securing a car. The stench of a wonderful motorway with an eye-catching pit. For the whole of it is necessary to warmly insulate the garage and the interior of the interior. Thermal insulation will be more beautiful than one of these materials: cotton wool; wicked mineral wool.

Thermal insulation of a booth with a metal profile

Tsі see the heat-insulating materials for sale at the wiglyadі maіtіv, the installation of which is not wicked, the current difficulties. The stench is also characterized by wonderful heat-insulating indicators. Suchasnі mothers for vati, besides, they conceal another important power. The smell itself goes out for an hour or so (do not go out of sight).

The scheme for the installation of heat-insulating virobes is as follows:

  1. Attach the cross rails to the metal bars of the garage. At the end of the stage, brothers go to the respect of the mothers, who are victorious. Tovshchina remains, before the speech, maybe 10 or 5 cm.
  2. Distributing mothers with styles.
  3. Place a special float with steam and moisture characteristics on the heat-insulating ball.

The final finish of the garage is in the middle of the garage, and it is made of profiled steel sheets. The stench is easy to attach to the stik with self-locking screws. Dodamo, the technology of building a bus from profiles to go for building a garage on a separate road has been described. You just don’t need to dig a hole and insulate it, if you don’t plan to operate it during the winter hour.