Kozhen, who has repaired the state of affairs of the vlasny booth, or is it ousted, in the first place zv'yazuvavsya for the nutrition of the foundation. Mіtsno vikonane will become the superior support of your donkey on the whole rock. The most extended materials, designations for plastering the foundation, are concrete and reinforcement. Montyuchi is made of concrete, it is important to correctly form the frame and to build up the necessary amount of metal. The robot, the viconan with his wet hands, is allowed to be spared on the services of the awakening brigades. If you carry out all the projects yourself, then you can spare the delivery of the material, if you didn’t get it right. Until then, you will be able to play, all the material is in vitrat, and not having gone to one of the workers at the dacha.
The reinforcement for the striking foundation serves as a free skeleton. Having taken all the warehouses of the frame, fill the foundation with concrete splines, allowing you to reach the maximum performance indicators. An important point in the right is: the need for the metal, and the size of the frame material. Infected free online calculators, which can help you develop a number of reinforcement rods, primed on the dimensions of your budget. The most beautiful of all is the viconati with the power hand - it will help you more beautifully to the structure of the foundation, and you will also become a corny ado for you.
reinforcement characteristic
I want a hardened concrete solution, and it is taken on a michno basis, albeit some of my inadequacies. Even if it’s like budov, the foundation can easily be subtilized until the collapse of tectonic plates, as well as shrinkage. To secure life from all these factors, more beautifully with the ability to construct a foundation. Metal fittings can be easily used by the employees.
The head function of the metal rod is to armour the size. Concrete should not be brought to plastic materials, which may be indicative of elasticity. For such a gap, deformations are characteristic, as they are detected when new options are added to the delivery. An overwhelming grip on the foundation can change its shape, as much as completely ruin the design.
Schob uniknuti deformations, the foundation must be correctly feasible. With a lot of varto vrahovuvati, the line to the foundation is strong up to viginiv in two points. In a large world, the construction is strong until the integrity of the surface is broken down for the crackling and stretching of the hardened gap. Such a breakdown can mean a loss of advance: for the wrong rods were broken and the wrong diameter of the rods was picked; For the frame of the images is unclear.
We are sick of the striking foundation from zalizobetonu, we took into account its low stiffness indicators to tension. For the sake of themselves, they pocketed the vicissitudes of the military elements, as they moved the indicators of the miracles, both later and in the transverse part of the display. The upper ball of the concrete coating is the most damaging to deformation. The very same frame is taken from the form of parallelepiped. This form allows you to maximize the strength of the foundation for the rakhunok of metal rods, which are close to the surface.
vibir fittings
Before the ear of awakening robots, tied to the folds and to the foundation of the frame, it is necessary to correctly handle all the material. If you set yourself up to the utmost with great care, then your booth will serve you for the next hour.
One of the parameters required for the correct selection of fittings is the diameter. Schob correctly develops the parameter, it is necessary to accurately vivify the project of the maybutnyy submission. Give respect to all aspects, we will tie it to the foundation. It is even more common to make a step of little meaning, then to be recognized at the destruction of the exploitation of the past.
Vibrate the required diameter of the reinforcement for the frame, be sure to respect the next parameters:
For the construction of a striking foundation of a small Zamisky booth, fill the reinforcement with a diameter of 12 mm. It is possible to spare a trifle for sparing, while not consuming the strength, it is possible in the form of a small diameter armature. Crimson, the material for the jumper can be vikoristovuvati smooth. On the vidminu of a corrugated reinforcing bar, smooth - just lower the part, ale, turn it off, so that you want to lower the value of the foundation. If the budova is not large, then it is possible to vikoristovuvati і a smooth rod, for a booth of a large size, radimo vikoristovuvat corrugated reinforcement in the capacity of all the other parts of the frame.
Main vimogs
First you need to fix the frame, you need to find all the basic standards for the material, from which it will be vikoniy. First of all, the service of standardization of quality to carry out tests and changes to the material is not necessary. The stench will add to the development of all the strong and weak sides of the metal reinforcement, so that they can be found in the common ruin and unremarkable inheritance.
Krim pererakhovanih vishche vimog, іsnu іsnu, as viznacha razmіr the overflow of the reinforcing bar.
In order to correctly vibrate the diameter of the reinforcement, I respect the offensive indicators:
Repairing the preparation robots, tying the rosette and vibrator to the material of the foundation frame, respectfully integrate all the special features of the material. Correctly select the parameters, allow the installation of a straight foundation quickly and without additional investment, and the quality to be lost.
armoring the foundation
It is clear that the foundation can be built up, it is necessary to be reinforced. For the whole, it is necessary to collect all the necessary material, in which case the frame will be assembled to the foundation. Correct pidrakhunks allow vitratity metal "pid zero", by themselves to amuse you in difficult situations, related to replacement and delivery of everyday material.
Rozrahunok material
Tsei etap maє on uvazі in sobі exact pіdrakhunki and correct endowment. Most often, you need to correct that value, you need to see it from the front ones. By such a rank, all the meaning of mutual ties, and wrong numbers can be attributed to themselves not wanted inheritances, which can be fatally recognized in the business of your hamman. Stand up to the robot on the whole stage in the edge seriously, and better fuck all the two, so you can beat the metal rods for cinnamon.
Yak bachimo, to carry out all the necessary development is not a warehouse of special difficulties, it is not possible to correctly build all the measures and accurately specify all the values. Please, take the material with a margin of 10%. Oskіlki when taking the frame you will often wear out metal, then there are simply no surplus reinforcement bars.
Zbirka and tying of the frame for the stitching foundation
Now, if all the rosters have been carried out, the fittings are on the floor, the foundation of the rods can be made, and the formwork is ready before exploitation, it is necessary to prepare the frame, which is necessary for the improvement of the performance of your booth. It is important to note that robots of this kind can pass more easily, as if they needed a special flexible verstat. If you do not seem to be moody, you can speed up the old people in a “didovim” way. 
Schob vasloruch zignuty metal rod to fit in such a way:
Now the ready structure can be placed in the formwork and repaired to tie the kuti. At all stages, it is important to show that everything is correct, some of the differences are due to the transfer of special features. Unintentional tsikh rules can be attributed to nevorodny inheritance, tied from the past kutіv and іnnazhnye deformations.
To correctly tie the kuti, after the next moment:
I will give you a lot of respect, so that the foundation will serve you for more than a dozen rocks. If the tying of the kut_v is completed, it is possible to repair the tying of the entire frame. At the link with the development of alarm technologies, more and more analogs of tools and materials appear on the current market, which can be stuck for tying the metal frame.
There are a number of ways that can be easily seen when tying the frame of the striker to the foundation:
To do this, more beautifully, turn to the peculiarities of the installation and tying of the frame of the stitching foundation, you will be able to marvel at the next video:
Zbіrka and tying of the stitching foundation will go through easily and quickly, as well as come with respect to all the special features of the technology. The skin stage will add to the previous one, it is even more important: make everything calculated correctly, vibrate the correct diameter of the rod cross, consult with the sellers in the metal rolling, and also select the correct working tool. In any case, with an armored foundation (pile-grillage, monolithic, stitching or whatever), be sure to make a metal frame. The skin species has its own methods of setting and installation rules, however, the material becomes invisible.
