Yak armuvati striking foundation with your own hands

Dribnozaglibleniy strіchkovy foundation, which can be easily built in a nice country with your own hands, it’s most often vikoristovuyu for the future of small wakeup, or fenced in the country house. For the advancement of the yogo stikosti and mіtsnostі vikonuyut armuvannya.

Before the ear, be-like robots, it is necessary to clean the territory: see the goodness and cleanliness. For zdalegіd viskonanoy development, it is necessary to viriti trenches. The price can be changed by hand or for the additional help of special technology. For, schob walls bouly rivnі, it is recommended to install the formwork... The frame slides into place at once from the formwork. Then fill in the balls of solutions, carry out hydro-isolation behind additional sheets of ruberoid. With the right tailored technological consistency the term of exploitation of the striking foundation of the warehouse from 20 years... Alle, it is recommended to use skin 10 repair robots.

Navischo armuvati striking foundation

Often energized, like armuvati the correct foundation with your own hands. Concrete is finished with mint, ale lack of plastic material. Win can good to fit with nautazhennyam on a grip, ale ruinuvatisya at nautazhennya stretching.

Concrete in the edge is rotten for stretching, і to "help" yomu, for balls in concrete, scho to stretch, і to introduce steel reinforcement, yak і take on itself zusillja stretching

For the improvement of the moral foundation and the continuation of the term of service, it is possible to fix the armoring of the striking foundation, as it is possible to visit it with your own hands, without specializing. Enough to meet the technological endurance and good quality material.

And even if the robots are victorious from the dimples, then it’s worthwhile for the foundation to sprout:

• shearing fittings, laid horizontally, significantly increase the performance for cutting and vigin;
• twigs, roztashovany vertically, serve as wicker elements that will make the difference to the sprint.

For the reinforcement of the striking foundation, the vikoristovyutsya shearing of a sizeable diameter, fallen as a sign.

Yak rosrahuvati number of fittings and diameters

It is possible to know how to make a given rozrakhunka, how many rods of fittings and various sizes are required in order to give a sufficient amount of money to the line foundation. At the same time, the fittings of the youngest species are stalled.

For the construction of a striking foundation, ribbed rods with a diameter of 10-20 mm are used to form the ribbed rods with a diameter of 10-20 mm, and for the transverse and vertical reinforcement, smooth round rods with a diameter of 6-12 mm are used.

The scheme of armoring is to lay down from the smallest instead of the later hairs and the smallest diameter. So, according to the norms of SNiP, the later cutting should not be less than 0.1% of the area overrun. For example, if the height of the line foundation is 1200 mm, and the width is 400 mm, the width is from the rods, the minimum overhang area is overrun of the rods є 480 mm2.

The figure, the yak went to the front rotor, needs to be distributed to re-fit the back fittings. The number of later haircuts for the frame will be approximate.

Alternatively, you can add a number of hair cuttings of a singing diameter according to the table:

Reinforcement, fallen asleep of steel grade, low pressure expansion.

In addition, it is the smallest allowable diameter of the reinforcement rods.

Regularly from the date of publication of the news from the following:

In order to be able to design materials for the armoring of the line basis, it is necessary to freeze or count the number of lines and multiply by the number of late lines in all lines.

In order to count the number of transverse clamps, you need to use a number of clamps, if you plan to stand up (before the line goes through the clamps), you must multiply on the end of the armature, for one This is how the rozrahunok is carried out itself, as soon as there will be no clamps, but a piece of reinforcement.

Yak correctly armuvati the foundation with your own hands

If the number of rods is viscous, then the required number and diameter of re-cutting of the later rods for the reinforcement of the stitching foundation is required, it is necessary to modify the pattern of knitting the frame.

Існує кілька options. More beautifully, vibrate simple and nadіynu. Inodi select the scheme, for which you can select the armature of only the lower or upper part of the line base. Ale tse robiti is not varto. And the booth itself is poured onto the foundation from one side, and from the bottom - the force of frosty obdimannya to the soil can be wicked around the upper parts of the base. Otzhe, armuvati need і upper, і lower part of the base.

The middle part of the yakraz may not be vrahovuvati. Even if the number of haircuts for an armored person is not possible to fit in two rows (above and below), then, obviously, think about cutting a dodat tier in the middle.

Think more beautifully that zastosovuvati a simple scheme of armoring from a square or a rectangle... Todi, if at the same time the axes of the frame are correct, then the very basis will be flexible and stylish.

Frame installation

As soon as possible, the availability of the foundation with additional fittings, which is supplied. You can also speed up the number of sticks and save material resources.

Fakhivtsi recommend before the installation of the frame to create a pidbiton... Such a gravelly-gravel pillow will become an offensive rank: pour the base of the foundation with a 5-8 mm concrete ball and clean it up.

As soon as possible, it is possible to manage without a concrete block, before the lower row (tier) of reinforcing shears are installed. When quilting, between such a pillow and reinforcement, the gap is less than 15 mm in order for the concrete rods to penetrate from the bottom and to replace the reinforcement by ourselves.

For installation of horizontal rows most often vicoristovuyut round ribbed reinforcement, the diameter of which is 10 -16 mm.... Later rods can be connected with horizontal transverse reinforcement. Shearing of late fittings are scrapped by fittings with an overlap of the fittings shonaimenshe 50 div.

If the height of the line foundation is more than 0.15 m, the upper and lower levels, it is also necessary to scrap the reinforcement with vertical shears. For the most frequent use smooth reinforcement with a diameter of 6-8 mm. It is recommended that both transverse and vertical reinforcement fit the clamps from the rods., which bends, like a frame and is mounted behind the dimensions of the frame.

Ale, like, the scheme of the armature of the line base is not reversed, it is not necessary to forget, the distance between the reinforcement and the formwork, as well as the upper ball of pouring concrete, is not guilty of being less than 15 mm.

When you cut your hair, you get a soft knitting dart from steel.... For lodging robots, you can choose special annexes. For example, knitting hook. You can go to the store, or you can do it with your own hands. For those who need it, it is necessary to deprive the shmatok of the armature and the wood or a plastic handle.

The hole in the middle of the handle is guilty of that, but the core at once from a hook could wrap around when the dart clanged. So її store navpіl and start up a stick of fittings. The guest part of the wheelbarrow loops the dart and rotates 2-3 turns, ringing with the last... If you do not, it’s not easy to tighten it tightly, but don’t rozіrvati її. Deyakі zasosovuyut zvaryuvannya. Ale fakhivtsi do not recommend them to koristuvatis, because Miscya z'єdnan often conceive of corrosion.

If you want to work, you need to stitch, but the diameter of the later haircut for the straight base is the same and the size is equal to the width of the whole foundation. For some reason, the diameter of the strips is reduced, then the reinforcement of a larger diameter is located in the lower part of the stripe. Slid suvoro stitches, schob shearing fittings of the upper level of the frame were raised over the openings between the rods of the lower level.

Umіltsі pristosovuyut self-made knitting knob to the screwdriver and by ourselves quickly accelerate the process of knitting the frame

Armoring of a striking foundation can be done with your own hands, without buying expensive tools. Adequately meet the technological results and materials of the recommended sizes. The term of exploitation of the base will have a lot to do with it.

More details about those who correctly arm the foundation with your own hands, you can look at the video: