Neat, clean, and handy in the garage is not a luxury, but a necessity.

In spite of the blocking of the maidan in front of the garage structure, it is no less easier to move a car in its place, but it protects the spore from the penetration of the forest, the snow and other things.

Self-sustaining work in'їzd under the force of the skin's hairdresser of the car. Golovna, choose materials correctly and achieve technology with maximum accuracy. We build such attachments from various materials - concrete, metal, wood and paving slabs.

The metal version of the mіtsniy and nadіyny, but negative temperatures again make it slimy. Getting out of the village is easy to prepare, but it’s not long-term and will help you replace it after 2-3 rocks.

Maydanchik in front of the garage, carefully laying paving slabs, looking straight ahead, for friendly minds, for a long time to serve. Ale and їy pritamannі nedolіki - skhilnіst to zledenіnnya that nоstіykіkіstі to salt. Therefore, concrete is the best option to use - an inexpensive and valuable material from the operating authorities.

The life of a garage is impossible without a well-planned entrance.

This attachment, clumsy at the vikonanna, simultaneously vikonu such functions:

  • Glazing the difference in the area in front of the garage doors;
  • Reduces the burden on the undercarriage of the car and makes it easier, hassle-free parking;
  • Protects the inner space from the littered fall and zabrudnen.

There are three options for blocking the entrance to the garage - a ramp, a screed and a paving.

The ramp, which is a shabby flat between the threshold and the path of life, is the most popular and easy to prepare. The more flat wines, the more comfortable and easier for the motorist.

The ramp can be straight and turnable, and as it leads to the underground garage, it can also go downhill.

Oblashtuvannya tsgogo mind zazdu vimagaє dotrimannya rules:

  • The optimal length is 5-6 meters;
  • The width to lay down in the dimensions of the garage, from the skin side of the attachment is guilty of protruding no less than 30 centimeters lower;
  • The optimal cut for the sickle is 25⁰ (as the value is overstated, the next step is to increase the length of the ramp).

The pavement is a smug and sickly day for the introduction of water. It is prepared out of concrete or asphalt.

The screed with concrete or cement-food sum is vykonuetsya with the method of giving a greater hardness to the soil ball. Tsey even Maidanchik provides comfortable parking of the car and crosses the penetration of the ford into the middle of the garage.

Maidan preparation

Preparatory work should be carried out competently.

At the cob stage, it is necessary to take a 15-centimeter ball to the ground over the entire area of ​​the future, - with a smaller depth it is impossible to provide the necessary rіven mіtsnostі.

Then respectfully look around the Maidanchik, revise the presence of new pits and nir.

Important! The soil needs to be strengthened, a spate of times after the clotting over the entire area. Particular respect should be given to plump maids.

At the bottom of the pile is a 5-centimeter ball of granular gravel. Tse to protect the concrete structure through the freezing of the ground during the winter period.

Formwork installation

Advance crock - installation of formwork. From the side of the garage gate, it is to blame for the level of the threshold, and from the side of the gate - for the level of the earth.

Formwork arrangements are made in the following sequence:

  • On all the corners of the prepared maidanchik, wooden blocks are driven in;
  • Boards are nailed to the kіlochkіv;
  • On the outer side of the skin (crimson side of the foundation) in the middle of the boards, insert one more piece for additional reinforcement.

If the formwork is ready, a waterproofing ball is subsequently laid, which is insulated. As a waterproofing material used for linocre, armored and other options, which are often blocked by an oblast coating.

And as an insulator - extruded polystyrene foam with a torso of 5 centimeters. We will install a reinforcing cage - a grid of stainless steel with a diameter of 2.5 mm.

Mixing of concrete

Preparing the distribution of the mix of three main components:

  • cement;
  • Pisku;
  • Napovnyuvacha (on the choice of gravel, pebbles, crushed stone).

Optimal proportions of the difference - 1 part cement, 3 parts sand and 5 parts topping. Water should be added from 0.5 to 1 part fallow due to the bagan density of the sum.

Zam_s concrete for mixing in the garage includes a few steps:

  • Concrete mixers are filled with water;
  • Cement is laid;
  • The piss sips;
  • Mix with a stretch of 2-3 strands until the possession of a uniform mass;
  • In otrimaniy razchiny add the necessary plasticizers and armored speech;
  • At the end, add gravel or rubble.

For consumption, water is added, mixed in front with a small amount of cement.

Concrete construction

Filling in "zdіysnyuєtsya at dekіlka stages:

  • The main ball is poured, the thickness of which becomes approximately 15 cm;
  • A reinforcing mesh 50 × 50 centimeters is inserted;
  • The final screed is poured. At the same time, it is possible to prepare a rozchin without crushed stone. Proportions of cement and wine are 1:4;
  • The screed vir_vnyuєtsya for the help of equal doska chi rules.

If the screed lasts for an hour, the beast on it accumulates trochs of dry cement - it is not allowed to improve the waterproofing power.

After pouring into the house, it is not possible to win as a minimum of production, to bring up as a wine it is possible to finish the mіtsnim in a sprat of years. It is necessary for a new polymerization and drying out. The formwork can be taken apart only after absolute hardening of the concrete.

The final stage in the journey is the refining of the workers, who will come forward, behind the help of the grinding machine, and the ennoblement of the wildly beautiful look.

Shchob in'їzd viyshov effectively yakіsnim, it's important to protect vimogi, yakі are presented to the dermal components of the difference.

Optimal brands of cement - M400 and M500. Yogo consistency can be dry and stingy.

Sand is most likely to saturate the river with a fraction of 1.5 to 5 millimeters.

When preparing roses, it is necessary to vicorate pure and diluted acids and water. That river that lake water is not suitable.

For the sake of marveling at the cicave video:

Polypshiti quality and operational power of the concrete structure can be supplemented by adding to the size of additional components. Before them one can see:

  • Plasticizers for the regulation of thinness and viscosity;
  • Extinguish the vape, which makes the laying process easier;
  • Reinforcing for increased strength (for example, polyvinyl chloride or polypropylene fiber).

It is the best way to work on the closing of concrete in the air at a temperature of +3 to +25⁰С. As a result of the process, it is necessary to improve the design, organize equal improvement of the design, as well as to install special additives with anti-frost power.