It is not often necessary for the processing of metal virobes to control the deformation process. Development of a price without a special possession is even more problematic, and the number of factory models of visok. That will be the will to be able to use the hydraulic press with your own hands.
Appreciation of the hydraulic press
The whole type of permanent and stationary possession of signs for the processing of steel elements by the pressing method. For a whole in the design of the gears, the block for the shutter vise is the support frame on which all the components are fastened. Factory installations may have great dimensions. A small hydraulic press will be enough for a robot at home.
The area of storage for the tool is large. On an industrial scale, the production of folding parts is also available. At the same time, a high level of accuracy is guaranteed. For processing small workpieces, self-made press models are most often frozen. As the main component they have a jack, ale є y alternative options.
Possible spheres of storing:
- vipresovannya pіdshipnikіv mother. The price is relevant for small and average motorways;
- bend of metals in the growth form. Correctly vygotovlenie vladnannya possession allows you to create a virobi to achieve great accuracy;
- a vise for gluing two different materials;
- the installation of rivets in the construction of the great tovshchinoy.
In practice, hydraulic press, crumbling with my own hands, I can find more spheres of storing.
For the removal of the arachis olia in small amounts, it is possible to vikoristovuvati the description of the design. Tse is relevant for private farmers and government donations.
See the construction of the self-made press
Before it is necessary to look at the available options for preparing self-owned possession. An important component is the mechanism of the sliding vise stem. Also, I respect the shape of the ramie and the configuration of the support table.
For the preparation of a manual mechanical hydraulic press, the power unit is vibrated with your own hands. The most important thing is to put a jack on a jack. Yogo maximum vantageop_dyomn_st viznachit a vise on the procurement. The value of the parameter is to be found in the type of viconuvanih robots. For operation in household sinks, you can vibrate the jack model from 7 to 20 tons.
An alternative option is to install a hydraulic cylinder and a pressure pump. Tse allow zabezpechiti maximum comfort for an hour vikonannya robots. Ale the conscience of a similar design, broken with your own hands, it is significant, below the verstat with a jack.
The case of the verstat is most often protected from steel channels and kuchkiv. Tovschina material should not be less than 2 mm. The design of a self-contained hydraulic press with a jack or a cylinder is stored from the offensive components:
- block of fastening of the jack Yogo stock, scho to collapse, you can roztashovuvatisya yak at the upper, and in the lower part;
- Supporting style On the new one, the detail is cut off. It is recommended to transfer the power of the jack to the jack;
- framework. The power unit and support steel will be installed on it. At the lower part, for a short stance, it is possible to straighten the legs with the flexibility of the height adjustment.
The detailed design of the armchair is not given at all, although there may be some small details. It is recommended to study in advance from the factory analogs, on the basis of the given data, independently develop the optimal model.
For different types, the fittings are especially shaped. The smell of being able to be made from solid and instrumental steel, it will be problematic to build with your own hands. It is recommended to have a replacement with a professional turner.
The procedure for preparing a hydraulic press
The first stage has a precise armchair, which has all the components of the design. It is necessary to take care of its exploitation and technical qualities - overall dimensions, steel strength, jacking capacity of the jack.
First, you need to find the optimal set of tools and materials. For obrobka that zvaryuvannya steel constructions you need a zvaryuvalny device, a taut drill, a set of bolts and nuts. Forming blanks for a manual hydraulic press can be made with an autogenous or a Bulgarian. To mount the power plant, you need to open the door on the first floor.
- framework. The frame is ready for use from channel # 6. Z'єdnannya vikonutsya in two ways: with a device and a mechanical one for help;
- Supporting style The optimal design option is the installation of two channels with a gap between them;
- jack attachment. Yogo can be placed at the upper part of the ram. The handle is pushed up for the promotion of the correctness.
As soon as the cylinder of the pump is selected, it is necessary to correctly adapt the technical parameters. Especially the price should be carried up to the maximum value of the vice, so that it should be pumped up. Installation of self-contained cylinders is not recommended. Even so, it’s quiet, but we went out of luck, but instead of renewing models.
