We will be glad, as the materials in the statistic will help you to create such a setup yourself.

Verstat and cinder blocks

The price of the product itself, obtained for the additional help of such a verstat, will be clear, so as the prices for cement are often fixed, and you can start to develop them in advance, and you will need a few and a lot of prices. And now let's move on to the right and take up technical robots.

robimo verstat

  • First for everything, next to mean, it’s all right from GOST 86 from 08.10.2001 and Decree Cabinet of Ministries of Ukraine dated 13.08.97 No. 1013, a certificate for making with your own hands (in home minds) blocks from concrete with unsuccessful filling. Likewise, the wine is not required for the establishment and installation of the Vibropress.

  1. Piddon matrices;
  2. Prepare for a donation;
  3. Prepare for a donation;
  4. Prepare for a donation;
  6. Framing the matrix at the bottom with a coil 25 × 25 mm;
  7. Framing the matrix at the bottom with a coil 25 × 25 mm;
  8. Plank for fixing voids;
  9. Pustotnik;
  10. Void plug at the top;
  11. Hollow plug at the bottom.

  • Look for an armchair and a photograph, as the very creation of verstat for preparing cinder blocks, but I still have a little explanation. Move the credit to the building, de-balancing the imbalance of vantages in the building. The cylinders for making blocks are due to the mother's taper not less than 2-3 mm, and the shape was known without any problems.
  • In order to make a verstat for making a cinder block, we know a sheet of gold, with a thickness of 2.5 mm. Before it is necessary to open the sheet with a Bulgarian one, as shown on the chair in point 1, so that, in the moments behind the disk, there is a thickness of 2 mm, so that when you start it will NOT be a thrill, and it will be readable itself.
  • Once again, you will need to reconsider all the cutouts, so that the accuracy of the bull is right up to a millimeter, and if you do not immediately fill the seams, but just pick them up with dots, it’s clear that it’s like a geometric mill. If everything is in order, then to weld the seam tightly, for all the time. Now it is necessary for the shock absorber to weld coils along the bottom of the matrix, as well as to weld piddon pid razchin.
  • The machine for the preparation of cinder blocks, or rather the matrix, is cooked from the bottom and from the top, and the coils are immediately welded for fixing the vibrator. For verstat, such as insurance for one form, be it an asynchronous motor of 120 watts. Ale zruchnіshe vikoristovuvati triphasic dvigun for 180 W, having switched it on according to the scheme of healing from one phase, to which an explanation will be given below.

It's joy. For the preparation of voids, you will be in the middle of a metal pipe.
But at the same time, it’s necessary to sound 2-3 mm or more, so that the shape of a cone has been shaped.
For the sake of heat, heat the electrical or gas burners and pull them with a hammer.

dvigun connection

Scheme 1 connecting a three-phase motor through one phase (3 darts): a) - with a starting support; b) i c) - with a working mnistyu

  • When a three-phase motor is connected through a single-phase boundary, the building must be moved no more than 50% -70% of its nominal effort, which is indicated on the shield, but if the capacitor is added, it is possible to increase the load by more than 85% in The front of a three-phase motor can be called the visibility of a special starting attachment, which turns on the starting winding of a single-phase motor when it starts up.

Scheme 2 connecting a three-phase motor through one phase (6 wires): a) - with a starting support; b) i c) - with a working mnistyu

  • If for the installation for the preparation of cinder blocks, a triphase motor is used with a nominal force of 220 V, then you will see the first connection diagram, ale on diagram 2 shows the connection to one phase of the motor from a set of 80/2/2/2
  • In quiet cases, if the naprugs in the hedge are one of a different number, tobto, UC = 220 V at a nominal 127/220 V or UC = 380 V at a nominal 220/380 V, then circuit 1a and 1b will be stuck. Allegedly, the fringe of the hedge is taken to the first number of the nominal, so the scheme 1c is victorious.
  • Average mnіst Ср (μF) for any circuit, the value of the output from the sprung single-phase hedge Uc and the nominal strum Iph at the phase of the three-phase motor: Ср = kIф / Uc de k - the efficiency, if the circuit is included in the circuit. At a frequency of 50 Hz (adopted on the territory of SND), for schemes 1b and 2b, it is possible to accept k = 2800, and for scheme 1c - k = 4800; for the circuit in Fig. 2c - k = 1600 ..
  • The capacitor springs Uk will be found in the wiring diagram and the wedge springs. For circuits 1b and 1c, it is possible to take approximately equal voltage values, and for circuit 2b - Uk = 1.15Uc; for scheme 2c - Uk = 2Uc.

It's joy. Do not forget about those, which condensers will take a long time to spare, and with a dot, they can shock people with an electric strum.
To that, when carrying out any kind of maintenance work, it will be necessary to distribute for the additional help of a short confusion.
Also, these elements must be closed with a casing and securely fixed.

Installation for pіnoblokіv

  • On the view of the add-on, the installation for the production of foam blocks cannot be prepared so simply, since there is a necessary foam generator and a foam concrete mixer. Mix the cement with a handful of 2-3 chilines in a whole lot of sand until the one-sided mass is removed, and only when it’s sent out from the foam generator, and again to change to the one-sided mass. Otrimanu sum_sh is poured into forms with wrapped blades. (Div. Also the article)
  • An hour for the product to be caught is 24 years, tobto, one addition at a temperature of 15⁰C. It is possible to get knowledge of the cost of verstat for the preparation of pinoblocks in any online store, and at the same time, to raise the price from the nearest point of sale of alarm possession or electrical goods. Shvidshe for everything, that the last option will come out dearly.

preparation of cinder blocks

  • For the preparation of cinder blocks, you will need a coarse slag, large sand (if possible - expanded clay), gravel from a fraction of 2 to 15 mm, cement grade M 500 water. All the prices you need will be in the middle of the family 7/2/2 / 1.5 / 1.5-3 odinits.

It's joy. To make sure that the correct amount of water in the list is correct (in order to accumulate the amount of water in the warehouse), the changes in the differences will need to be squeezed into the kulats.
I’ll be angry when I’m getting angry, because when I’m falling to the ground, I’ll get angry, that’s the proportions that I’ll see.

  • Blink the shape again and turn on the vibrator, turn on the tampon, and then add more. So be careful not to break, until quiet feasts, leave the print not to go to the interlocking. When playing, turn on the vibrator for about 10 seconds and know the shape (the shape is necessary to know when you start the vibrator).

  • Transport drying of blocks (camp, for which it is possible to transport accurately or to transfer) three times from five to seven days. Residual hanging, if the unit is attached for installation, should be blown through the month, at temperatures not less than 20⁰C.

It's joy. In order to uniculate the appearance of cracks and by themselves, the frost resistance and water impermeability - add 5 g of plasticizer to the skin block.

visnovok

For the preparation of yak_snyh cinder blocks, she is guilty of poorly fixing instructions, she is guided. (Div. Takozh stattyu) With a lot of slag on the possibility of being more beautiful than vicoristovuvati domain, and the song is the greatest. Cement can also be vikoristovuvati brand M 400, albeit in such a way, its number is required in proportion to 1 unit. Successful preparation!