An educational pedlog system is a vidminny option for the establishment of comfortable temperature minds. Such blocks can be equipped with a supplementary heating dashboard, and an individual one, which, by and large, scorched the room and navigate the whole house. In the Danish hour, on the pedagogue of the university, it’s obigrіvu vikoristovuyutsya for insulation not only zhitlovyh buildings, but also іnіhshennyh, but it is necessary to spend a lot of hours.

So, for example, why wouldn’t organize the heat of the pedlog in the garage, or for the bagatokh cholovikiv the house is not another house. In the middle of the season and the charging of such a system will allow you to smoothly program the application and save the car in its entirety. And how to build up the heat of the food in the garage with your own hands, see our statistics.

Options for the garage

Can you power it up, but is it really warm in the garage? But maybe, lyudin, it’s not just a car, so I thought, but the axle of the owners of the transport vehicles melodiously appreciate the parallels of opaline systems in that place, because there is a chyricolian "wicked friend".

So, the warmth of the pidloga in the garage, the messages about how to finish the growth, allowing the freezing of the mechanism of the car to pass through. Along with melodiously skin water, take a vitrachati hour to start a car in a cold season of rock. At the same time, if the garage is victorious to stretch out all the way for the repair of cars or for those purposes, then it’s covered with a primed opaluval system - it’s all the more necessary, and there’s some reason for such an installation.

The heat generated in the garage can be covered with one of the upcoming opalium blocks:

Vodyana opaluvanny system

A simpler version of a pedagogical study. The heating element itself is a closed pipeline circuit, through a circulating hot water. For scorching the priming into a wide range of vykoristovuyu boiler, and the pipeline, as if circulating hot water (heat) is poured into cement constriction. As a rule, in the quality of the heat, metal-plastic pipes are vibrated, which will prevent equal heat and heat losses. You can, obviously, carry out in the garage a small or aluminium pipes - the stench will come out of the high heat and power. However, partnerships with such materials will not come cheap to you.

electric field

Such an opaque university can also be closed by contractions with a design, which will prevent the smooth running of the surface. The classic option is a cable circuit, which is practical from the electrical circuit, with the help of which electrical energy is transformed into heat. More innovative models - plastic, infrared and thermomat.

It is not enough to secure a standard garage program; The very "weak lanka" є garage gate - the most warm surface in the most primitive.

But it’s simpler to start, as if I’m going to show my pass, it’s necessary to go to those passages and shortcomings.

Crossings and shortcomings of the water system

You will be able to use a popular type of training for a popular type of training, but you will not be unfounded, as you can see it:

  • pristіy of such an installation will cost an order of magnitude cheaper, nіzh installation of any kind of prikhovany heating;
  • a block of work for the circulation of hot water through pipelines, which can be used to minimize power supply;
  • visibility of the heating element;
  • Rivnomirniy, step-by-step programs in all pidlogs of the surface.

Until the shortage of such universities, you can include:

  • іmovіrnіnіnіnіnіa іtіkannya and foldability of їх localization;
  • the need for a circulation pump and boiler.

It will also justly be said that such an opalescent block of wickle-folding in the regulation of the temperature regime.

VIDEO: Installation of warmth pidlogi in garages

Electric field - special features of exploitation

The design and installation of the same type is simpler, less if the front version of the enclosure block is plastered. With a whole lot of vitrata of electric power for the burning of food, it’s just growing.

Perevagi electric field:

  • Possibility to program areas of different configuration and designation;
  • the need for the installation of contractions of the cement base;
  • the visibility of the warmth;
  • the manifestation of the power of the area in the garage facilities without storing the special possession;
  • the value of the external construction of thermal possession is small;
  • As far as the problem is concerned, it is possible because of the ease of localizing the misconception for the forgiveness of the wrong;
  • Possibility of adjusting and setting the temperature regime.

Power supply with a concrete screed is relevant for cable construction, if a single or double-core cable is laid on the prepared basis and filled with a cement warehouse with plasticizers.

For the garage, the cable heat itself is the most rational option with a high KKD and maximum heat output. The demands of the water heaters and thermomats may not be necessary to clean up for such an application.

Along with the shortage of the electrical system є the increase in vitrate - in the middle, the payment for electrical energy will increase by 30-70% in the amount of deposits due to periodicity. Once again, I’m talking about the need to insulate the garage in the middle of the room to eliminate the colossal waste.

The order of work from the preparation of the surface

Having zared to build a warm garage with your own hands, you need to follow the next recommendations:

  • the heat-insulating fabric is laid over the entire area of ​​the site, with a wide variety of memory, such material needs to be overlapped on the walls of the crossbar at the height of the heating block;
  • we will not borrow, if we will make a bed in the garage and steam insulating material, which would prevent the possibility of dissipating heat;
  • the skin element of the thermal system should be placed in a flat ball, without creases and gaps;
  • heat-insulated mothers are mounted with an overlap and are fastened behind an additional alarm tape.

If your garage equipments are also necessary for special applications, then it is necessary to insulate them. It is especially important to have a garage with a cellar, to transfer products to the store during the winter hour.

Most often they used to insulate polystyrene with a canvas, as they show good operating characteristics, are resistant to fungi and plastic, as well as an affordable price, in the case of those who have made the same material.

Step-by-step instructions for laying down heat

How can you create heat in garages? I will explain to you the instructions at the food chain:

  1. Form a ground pillow. For the whole, it is necessary to take a primer base for the cich, to spread it on the surface of the garage and tamp it so that the ball is not less than 30 cm.
  2. Deliver a ball to the sound and so it is tamped down. Tovshchina tsho sharu is guilty of butti not less than 10 cm.
  3. Viconuєmo pouring chornovy screeds, for which it is necessary to reinforce the mesh and cement roschin.

  1. Chekaymo, leave the screed on the wall, and at the same time we can go three times, all the weather minds on the street.
  2. On a hanging screed, a sheet is laid with a hydraulic insulation, in the capacity of which it can be polyethylene plastic.
  3. There is no way to lay the heat-insulating material, which is known to be covered with hydro-insulating material.

  1. Now you need to edit the layout, and then go through the editing line.

  1. Laying the installation line on the 50-100 cm sidewalls is laid down for the cable and the need for adequate software.

The crochet of laying the cable is not guilty of shifting 30 cm, because there is no sense in such a system. It is forbidden to impose turns one on one and to allow overloading of the dart.

To make the exact appearance between turns, correct the crochet

The mounting line allows the dart to be mounted in parallel, one to one, quickly and easily. With a clear fixation of the stench, do not destroy when the screed is poured and do not stick one by one.

Grіє cable roztashovuu Viklyuchno in an open mind, in any kind of furniture and great objects.

Reverse the cable view from the wall - not less than 5 cm.

It can be seen in turns between 8-10 cm. You can change it. Ale just for the thought, that if vicoristan will be foiled with heat insulation, the creation of such a polygamy in a uniform rise of heat on the surface.

  1. In addition, as a cable, I came to install the thermostat. For a total of 0.5 meters from the surface on the wall, a groove is mounted on the wall, and a corrugated pipe Ø 20 mm is laid, if the temperature sensor is displaced. Once the thermostat is installed, it can be replaced.

  1. Connected support for additional dart, based on overflow. Install a thermostat on the wall on a wall of 30-50 cm, turn on the thermostat and go straight for the instructions of the virobnik. Everything went well, it took an hour to fill the pidlog with a screed.
  2. Prepare a cement connection with additional plasticizers and apply it to a hot cable. the height of the screed is not more than 5 cm, there will be insufficient heat, so it will penetrate the edge of it.

Help us, our joy from the garage building will help to bring your money into reality. As soon as you understand that you do not fit in with the factory by itself, then the professional Mystery will help you in the equipment of the garage with an internal heating installation.

VIDEO: Yak to insulate the concrete pidlog in the garages