To make sure your Avtodrug is typical for transport, where there are inappropriate minds, problems (corrosion, freezing of mastic) and to ensure that you are comfortable thinking about repairs, you can also install an opalescent system in a nearby garage. Water burning in garages is one of the most beautiful options for establishing optimal minds when using vehicles.
Not everything is so simple
Protest, the scorching garage for the car in some minds can be the reason for the same troubles, but the overwhelming vology of all the non-scorching primitives. In frosty weather, the weather roztanuv sih, so they took a look at the viewers in important places, maybe wicked corrosive changes to metal. Solving problems can be turned on for an hour, if it’s dry and you don’t know the garage for robots. If it is necessary to repair or take a look around the car, you will turn on the system just before the planned robots.Vodyane scorched garage is applied to the most vivid types of opaluvanny systems. We will be able to attach a kind of scorched person to the room, as soon as the garage is brought down to the booth, so that the robot will fall into the spotlight after carrying out the necessary comunications and there may be a chance to start a victorious event.
Already the main highway of the central fire, held in the booth, will become the best option for, as I have already said, which is connected to the main garage (read: ""). It is also a subordinate option for those who have grown close to the house of technical primitives;
If there is an autonomous boiler room, then it will be economically rimmed only in the same way as if the garage is located at the most important place from the central opaluvial magistral. If the garage is located in a group that is stored in decal garages, the so-called garage cooperative, then even more in the distance, there will be more complex autonomous opalescent systems for all applications.
Hand-held installation of a water scorching garage system
You can turn up to the faults, or stand up to the scorched in the garage with your own hands, however, in the last drop, Volodya deyakim with the help of such robots, with special knowledge, and if possible, consult the maystras in the following help: "(") When there is no information, a little more obvious, access to information that diminished hands, practically only for a short time, three can appear for more than an hour, which would be necessary for a robot.
- Values for water burning boiler.
- Metal batteries for an alloy of high thermal conductivity.
- Metal-plastic (the best option) for pipes.
- Fittings for fastening pipes.
- Tools for slyusny robots.
The designation of the diameter of the pipes and the necessary number of radiators
In the course of the design of the opaluvale system and garage, it is necessary to specify the value of the diameter of the back pipes. Downstream from the diameter of the riser water supply, into the system the amount of hot water will be reduced, and, even if the pipe diameter is larger, it will be more efficient. However, the vitrata of electrical energy for heating the water when moving. For the heads of this stage, the design є the knowledge of a reasonable balance between vitrates of electrical energy and a necessary stage of heating up the power in the community (read also: "").
Metal pipes, scho vikoristoyutsya for risers, followed by a supplementary equipment. When using polypropylene pipes, a special soldering iron is required. When the pipes are installed, it is necessary to remove the trochas from the pipe for the natural course of the circulation of heat.
The number of victorious radiators is also necessary for the purpose of increasing the heating of the garage and adequate energy supply.
Preparing and installing the expansion tank
When installing a water fired garage with one of the necessary components є an expansion tank. For the preparation of it with your own hands, it is clear that there is a plastic canister with an opening at the upper part of the opening, we mean it for the inflow of water. The need for a tank is explained by the fact that the system requires an hour every hour to add water, compensating for the vaporization during the course of the robot. It is also necessary to ensure that the water is boiled and it is necessary to ensure that the steam is supplied.
