The staff of the lags can be built up ideally for a long time in any kind of modern technology in business - at a price of unique possibilities. For bagatokh, these are the words yak bridging and polymeri, straightforward pidlog, GOST, tumbi, storage with a stovpchik, size 100x200, or 150x50 do not say anything. Already we were fixing the repairs to know that it’s good for everything, about the field on the logs. Some people just want to build up the strength of the stat, but someone needs new, beautiful and beautiful designs. І even more often the technology of vystuvannya pіdlogi on logs is often victorious.
Їх perevagi: scho take lagi
Immediately, say, put the pidlog on the logs in the bagatokh vipadki, just an ideal solution. Yes, this method has a lot of merits. Even more important are those who are warm.
Sered perevag lag varto due to reliability and low price
Also varto zrobiti pidlogi on logs like this:
- The noise coming from the sus_d_v in the apartment below will not penetrate to you;
- Installation can be done with your own hands;
- Part of the articles and robots is generally accepted;
- Provid th trumpets, which are not even more gripped, but not required, it is possible for such a lazy grip;
- Tse ecologichesky pidlogu.
If you are pratsyuvati, then the smell in the primitive will stand even more accepting. For the bagatokh, before the speech, the smell of chipped wood is a good antidepressant, which by itself triggers the mood and adjustment of the robot.
Lags are called beams, as they are required as a support for a hard podlog. Lags can be made of metal, from polymers, concrete, or even to lay down wood lags. The tree is simpler, and the cost is much cheaper.
From the beams, the lags are designed to be mobile and in smaller sizes. The beams for installation, if they bring a small butt, cannot be moved, but lags are possible. That montuvati їkh is much easier, and if repairs are required, they will be awkward and quick.
Tools for installation: attach pidlog on logs to the booth
For robots, you know a hammer, rivn, a screwdriver or a drill, nіzh. Materials for the preparation of such pidlogs are taken as such - shmat of chipboard or plywood, be it insulated, self-supporting screws, kutochki or P-padded attachment.
All the necessary tools for the installation of the lag can be found in any alarm store at an affordable price
Before installation, follow the entire area of the floor. Reverse the old screed, if the concrete pidlog is still intact, it will need to be paid. Then we see smittya and drank, we clean everything guilty. Then you need to put in the defect of the chornovaya pidlogi. Paul slid zaґruntuvati. Not to tell the pros about the need for a primer, as the procedure is not too far off. The primer is right, it’s guilty to get in and dry out, and then the wadi can be primed.
Then, the maximum point of the surface in the vicinity is counted behind. It is necessary to display a sign, which will be useful for offensive robots. And the distance of the robot to develop behind two possible scenarios: to break the screed, the surface of the vivodyachi in one piece, or to display the lags in the piece with plywood gaskets of a small size.
Pokrokova іnstruktsіya: setting lag for pіdlog with your own hands
To fix everything in order to keep the whole thing, or to lay the bars on the width of the room. The first bar and the rest will be 20 cm from the wall of the rosette. Rozrahuvati croc mіzh lags are required zzdalegіd.
- It is necessary to register the value of the pidlog, from the given moment the quality of the financial policy will be found;
- All bars are required to be placed in one horizontal area;
- For picking up, lay the bars or plywood;
- Install a little, it is necessary to fix the lags, for the whole thing to be self-defeating, or to put anchor bolts;
- Dovzhin, the interval of fastening is 70-80 cm, the timber is hardened, the concrete foundation is fluttering, the self-tightening screw.
Schob zrobiti pidlogu teplim, between lags next to heat insulating material
Є Variant of setting the lag і for adjusting the mounting, turning it, you will reach the required result. Before the word, if it’s not a wooden podlog, but a ceramic tile of small size, it’s 30 cm in size between beams. Їх it is necessary to have a fortune in rіvny rіven with late bars (vikorystovutsya kuchok). Also, the strength of the design is required for vicoristovuvati, and also for the size of the malium tiles.
Modern logs for pedlogs: timber size
The need for construction is not only because of the fact that you are picking up the board or metal elements, but because of the fact that you have the correct design. A good selection of visas starts with the dinner and the thickness of the timber. Dovzhina - the price of the dovzhina and the width of the booth. When there is a lot of binding, the gap is overlapped, and the beam, apparently, vibrates 20-30 mm less.
Such a ventilation gap is necessary - in order to prevent deformation, as a result of the trail of changes in volume and temperature.
Peretin of a bar, yogo size virahuvati foldnish. Here, the potential for nurturing on the pidlog is important, as well as the size of the spills and without the middle points of support for the given lag. Є table, yak will lie down rosrahunki. Chim more spilled, tim tovschі will be a bar. For example, the size of the spline is 3m, which means that the overrun of the lag is 150 by 80 mm. The form of the peretinu is zychayly rectangular. Vstanovlyuyut the beam on the edge, the lags vitrimed a high vice.
Yake vіdstan mіzh lagami pіdlogi
Croc lag will be found on the floor of the floor. Yakshcho vikoristovute flooring from mіtsnyh tovstyh boards, logs can be installed admittedly rіdko. Well, it’s a bit thinner and not very special because there is more lag.
Vibrate to see between lags of traces in fallowness from area of application and constructional features
Loss can be seen on pairs of butts. For example, the thickness of the pidlogi board is 30 mm, which means the interval between the lags is in a meter. Abbreviation 40 mm, flattened, crocheted with lags of 700 mm.
Downright precise rosrahunok is not required. Sufficient to take just be seen between our average lags. And if in the beginning of the installation they did it, but it looks inaccurate, then the crock will be less laggy, and the construction will be less accurate.
Timber size: logs for pidlogs
Dovzhina of a bar is guilty approximately by 3 cm but is less than the width and the downgrade of primitiveness, is deducted to a pidlog. Dovzhina lagi is generally guilty of being less than a downgrade of room; Good work lags from all the materials, ale buvaє block is required to podovzhiti.
There are two elements for the rules:
- With the help of the mischief of growing up to be guilty of supporting elements, for example, stopping;
- As long as suspicious lags grow, then the points of growth will grow into one for one change.
We know how to tell the minds that there might be a threat of low hardness of the stat in the very same place, de fi ned timber. Suspended lags grow against the size of a meter. The whole fact is injected on the size of the taken beams.
Algorithm: stacking pidlogs on lags with your own hands
It is necessary to lay wood logs from the kutovy part of the attachment. Todi, the first row, start to shrink with a tongue and groove and in such a drop the width between the wall and the lag is guilty of being equal to 1 cm (to avoid deformation of the wood). Then a number of lags are laid down for the first lag, approximately on a splinter of beams.
Schob mіtsno doshki krіpilsya to the base, you need a rope to knock on wood with an alarm hammer. For reliability, the price is necessary. The boards are attached to the walls, fixed with screws. Screws can be on the surface, it's not important, to close the plintus.
Pidkazka: how to power state lags
Everything is individual here, ale deyaki zagalny rules є. For example, if on one level there are sectional lags and an enclosing lower bar, then there can be forged brackets, or you can help perforated coils. If the lags are roztashovany lower than the tying bar, then the brace-st_yka vikoristovutsya, metal.
Roughly apparent, the main meta of the power is a hard fixation of lag parallels and beams of the lower wind. At the end of the day, when the bridge is changing, stop rosy. Also, as a variant, it is possible to podlogi zgurtuvati until the shilines are worn out, and the gaps are simply curved with plinths.
