One of the most important systems of living in our own way is scorching. Є A number of different ways to create a system for playing. One of them is steam scorching. The system is effective, it is less stagnant even more rarely - too much for her minus.
Also, what is the difference to be seen from the type of water systems
A lot of people vvazayut scho steam and water scorching - the same and the same. Tse pomilkova dumka. With steam burned, there are also є batteries and pipes, є boiler. It is not water that falls through the pipes, but water vapor. The boiler is required. Yogo zavdannya viparuvati water, and not just heating up to singing temperature, apparently, the strain of yogo nagato vishche, so it is itself vimogi to the point of hope.
A series of steam boilers
system elements
When steam is scorched, water vapor moves through the pipeline. Its temperature is from 130 ° C to 200 ° C. Such temperatures are imposed on the elements of the system. Trumpet, trumpet. Chains of metal pipes - steel or middle. Moreover, the stench is guilty, but it’s seamless, with a good wall.
In a different way, radioators. Go only the chavunni, the register or the pipe with the ribs. Chavunnі with such minds there is less need - in a heated camp in contact with a cold іdina, the stench can burst. More important in the general plan of the register of pipes, snakes or a pipe with ribs attached to it is an opaluvial attachment of a convector type. Steel is more tolerant to cold water consumption on the surface.
Terms of service and area of storage
Ale do not think that the steel system of the steam scorching will serve for a long time. The steam is hot and steamy. And the price is ideal for corrosion of steel. The elements of the system are fast and easy. Call the stench to burst in the very events of the day. At the same time, there is steam in the middle under the grip of the temperature of three degrees, the problem is obvious.
This steam was scorched, not safe and fenced in for the bulk of the community's small houses and apartment buildings. Looks like vikoristovuєtsya in deyaky private booths, or for ob_gr_vu vyrobnichnyh primischeny. It is even more economical on virobnastics, as steam is obsolete to the technological process. In private booths, steam is scorched in the main in booths for seasonal living - in summer cottages. All through those who can tolerate freezing normally - there is little in the system and there can be no good, and also because of its economy at the stage of attachment (in relation to water systems) and a high level of software development.
Advantages and shortcomings
Steam scorching is not the most popular, albeit a little positive or negative. Moreover, plus add the values:
Incomplete steam systems are more hostile:
- Bring the temperature of the bet until all elements of the system are heated up to 100 ° C and for food. Tse to produce such inheritances:
- even more active circulation in the neighborhood, which is uncomfortable, but, for an hour, very loudly (with allergies to drinking);
- wow in primitive dryness;
- hot elements of systems and injuries, unsafe and need to close, moreover, pipes and pipes;
- not all building materials can normally tolerate trivial heating to such temperatures, so vibrating materials are even more enclosed (for the most part, cement plaster with heat-resistant farbs).
- A simple steam scorching is even less flexible in terms of regulating heat. Є Only one way to change the temperature is to create a series of parallel grids and include them in the world of need. Another way is to turn on the boiler when it is overheated and turn it on because it is too hot. During the process of kerє automation, a different way is far from the most comfortable, as it helps to maintain constant temperature.
- Galasliv system. In case of Russian steam, make a lot of noise. At the virobnik shops, the shop is not even inflated, but in a private booth it can be a problem.
Yak bach, steam scorched is not a nice vibe, I want to finish inexpensive in oblastuvanny.
See steam burning systems
For the method of attaching the steam to the steam, there are two types: from a closed and open system. In closed systems, condensate flows into a special intake pipe, which is brought into the cat's external input. Vona is laid with a small pit, so the condensate will collapse through the system with self-fuel.
In closed systems, condensate is collected in a special compartment. When stored, the wine is supplied to the boiler behind the auxiliary pump. In addition to growing steam boilers, not all the stench can be effective in closed systems.
Vzagalі, іnuyut system and steam scorching in a grip close to atmospheric or navіt s much lower. Such systems are called vacuum-steam systems. Chim is this setup? Timing, with a low grip, the boiling point will decrease and the system will lower the temperature. Ale the foldability of the unsecured airtightness - for the whole hour to spend the whole hour running through the day - was brought up to the point where the scheme's data is practically impossible to develop.
Naybilsh wider steam scorched with a small grip. The steam boilers of a perforated design can open a vise of 6 atm (with a vise of 7 atm, the control of a vimage is allowed).
tipi wiring
By the type of wiring, the steam is scorched:
When the steam lines are laid, use a small burial (1-2%) to the side of the steam head, and the condensate line to the side of the condensate.
Boiler feed
Steam boilers can be used on all types of firing - gas, hard and hard fired. For the choice of burning, it is necessary to correctly adjust the pressure of the steam boiler. It will be found in the fallowness of the area, as it is necessary to opalate:
- up to 200 m2 - 25 kW;
- from 200 m2 to 300 m2 - 30 kW;
- from 300 m2 to 600 m2 - 35-60 kW.
The outbound and general way of rozrakhunku is standard - for 10 square meters, take 1 kW of strain. The whole rule is true for a bed with a height of 2.5-2.7 m. Distances are followed by a specific model. When making a purchase, apply for a certificate of quality - the possession is not safe and well-proven.
Yaki vikoristovuvati trumpets
Temperatures at steam scorched can normally only be tolerated. The most cheap option is steel. Ale for їkh z'єdnannya needs a call. You can also be victorious of the children of the family. Denmark is a budgetary option, ale nedovgov_chny: steel in the middle of a shvidko korodu.
Large galvanized and stainless steel pipes, but the price is modest. Then z'єdnannya - rіzbove. Another option is middle pipes. Oh, you can only solder, the stink is expensive, but not rusty. Through a higher heat conductivity of the stench, it is more efficient to transfer heat. So, such a system is scorched to be super-effective, ale and even hotter.
