Not a small stove є a low KKD and the unhappiness of an equal heat rise in a small house. Find it better, but if you see it, the temperature will drop. The problem is to be found, if there is a vicarious supply for the scorched booth from the water scorched.

Perevagi and shortcomings of the water scorching system

Opaluvalny system of my own plus and minusi. Before the її passes, you can bring the following:

  • visoka heat supply;
  • ease of service, including in the main cleaning of the firebox, ash pan and channels, which are included in the main cleaning;
  • good faith;
  • shrinking inter'eru when using a stove with a stone;
  • The efficiency of adjusting the intensity of the furnace behind an additional shutter.

Besides, there are some shortcomings:

  • occupy a large area of ​​attraction;
  • the need for a pull-down foundation;
  • trivial programs when rospalyuvannі.

The robot principle

Pecto for a scorched booth with water scorching functions in a closed cycle with a heat supply, which serve as water. Vona go to the cauldron and be supplied to the radiators by pipeline. When the water is consumed, the water is turned back to run and the cycle is repeated.

Peculiarities of the food boiler

The boiler is a register of steel sheet of abnormal seamless pipes, in the middle of circulating water, and the call is carried out from the start of the firebox. Warehouse wall thickness 5 mm. As soon as the heat exchanger is less than 4 mm, steam is set in the middle of the heat exchanger, so there is a hydraulic shock. For the firebox, more wall thickness is required.

The pectinia with a water circuit for the scorched booth is designed and built for a new register.

Anyway, it’s connected with the problems of the exact choice of the heat exchanger and the partial picking of the masonry. The old ones are simpler to grow up, and the fragments in these many parts will need to be replaced.

The boiler occupies a part of the space of the furnace, it is recommended to expand it. To completely build a stove with water burners for a booth, so that it can work in a tricky fire mode, because it’s going from the top down to start the fire, and the firewood must be brought up significantly more.

The heat exchanger is to blame for the productivity, for the sake of compensating for the waste of heat in the scorched premises. 1 m 2 surface register viroblyaє 7 kW of energy.

In one more way, there is a way to increase the cost of the burner є to distribute the register from Dimar. As a result, the term of service of the boiler is improved, and there are some cases of no contact with the visible half-minds. Heat exchange with a large decrease in volume. Тodі 1 m 2 of the surface area of ​​the heat exchanger viroblyatime 3.5 kW of energy. But with a whole lot of wine, I can't close the cooking stove, but the process of preparing the cooker for it to speed up.

The baking itself will be warm. To that, the radio station is scorched by the rooms, de-noting the surface of the heating from the tseglyanoi masonry.

The boiler can be made on its own, a little more beautifully to add a factory model, as a guarantee of hopefulness. Pipe structures can be used for a larger heat transfer surface, lower for sheet steel.

Prior to the establishment of the register, the following are available:

  • drop in height between the inlet and outlet pipes;
  • the register is not guilty of stopping firewood from the firewood;
  • The size of the shirts is selected yaknaibilshe.

We are happy to talk about those who, with natural circulation, the boiler is guilty of growing lower behind the batteries, but it’s not possible to burn. The children of the koristuvachіv have faced problems due to the supply of firewood.

Pecti with a water circuit for a scorched booth

The water in the circulating system can be moved by a natural path behind the pipe and through the pipeline and due to the fact that Gustyna Ridini is in the middle of a cold mill. The way to give the possibility of ovens can be done autonomously. For primus heat supply, an electric pump is required. I will paint the heat transfer process, some water can be moved by a pipeline with a greater speed. Correctly establishing the system with natural supply allows the circulation mode, close to a primus one. For the main pipeline, to become 4 pro, and to go through the branch pipes - 1.5 m.

The optimal option is a combined heat supply system. If it is necessary to improve the process of heat exchange, the primus regime will be used during the roasting of the stove, and in those cases it will be natural.

Prices on the furnace and register

You can vikoristovuvati chavunni stoves for a booth with water scorching. Prices for them are repaired at 70 yew. rub. Typoviy register koshtu close 12 yew. rub. Any kind of food from ceglini will be cheaper for chavunna. Moreover, at the dachas, or in the Zamisky booth, it is problematic to throw a mobile chavunnu into a home. In this day, there is no alternative to a whole stove for a booth with water scorching. Prices for them are stored from the parts of the accessories and vitrate for masonry, but in 2 and more times, lower proportionally, with models from the chavun.

The design is efficiently combined with a chavunnaya stove and a tseglyany dimokhod.

With the periodic introduction of wood, there are water scorched for the booth behind the place to be stagnant through the freezing system. The problem is to change the water to antifreeze, which is not afraid of negative temperatures. Let's forgive the decisions for the storage of the food storage, which is easy to store with water, and then the energy.

Preparation before installation

Furnaces for heating the booth with water scorched to have the same possessions:

  • boiler;
  • grate;
  • trumpet;
  • cooking stove;
  • ashtray door and ash pan;
  • gate;
  • fіting;
  • chervona that vognetrivka tsegla;
  • dry sum_sh for preparing the price.

For robots, first for everything, you will need this: a pick, a hammer, a wake-up riven, a colony, a kosinets. Before laying the stove, the following vimogs are hung:

  1. The seam is not larger than 4 cm.
  2. Through 4 rows, the masonry is reinforced with steel vines.
  3. Tsegla can be made without cracks and chips. Look around the middle to be rounded.
  4. A head is placed over the chimney for capturing from the fall and the strength of the draft.

Yak sklasty pich for a private booth with water scorching

For robots to get stuck, this vogetryvka tsegla is very specific.

The pecto for the scorched booth with the water scorched wedges of the Viclada should be of the following rank:

  1. Fill the reinforcement of the concrete foundation with a pillow from the list. The upper part is checked for additional rules and regulations.
  2. For masonry, prepare clay foods. Soak the clay and wipe the coming day through a sieve, stick the breasts in and out. We can drink it at a ratio of 1: 2 and grow at the water.
  3. If the foundation is caught, lay a hydro-insulator over it with a ruberoid.
  4. Place the 1st row of the hoop on the track.
  5. From the onset of rows, form the contour of the blower and install the doors. Use a dart before laying.
  6. Through the splices of rows in the tseglyanoi masonry, expand the horizontal lines, with the lower part of the firebox.
  7. The firebox is formed with urakhuvannyy sizes in the register, which will be spaced at them with a small gap around the perimeter, by means of compensation for thermal deformation of the metal. Before the boiler is installed, the base is set on a coil, it can be wicked along the contour and lie on the pipes, and openings for the supply and return pipes can be installed in the boiler walls. The firebox doors are installed. At them, open the door, pass through them and fasten them to the walls.
  8. The cauldron will rise behind the rіvnem. The heat supply pipe is guilty of the highest possible level, steam was not drawn from the upper part of the boiler.
  9. A stove is installed for cooking food.
  10. Vikladaєatsya dimar. In the middle there are channels for heat dissipation and cleaning.

When the masonry is finished, the system is switched on and the robot is converted.

Visnovok

Pecky for a scorched booth with water scorched rooms will become richly rich and will serve the whole house of its simplicity, very cheapness, non-fussy and handy service. For her, she can go and be fired, right up to the entrance. Positive feedbacks are accepted.