Bagato vlasnikiv cars take on the appearance of warmth in garages when they are opened, and you can also feel warm in your home. And all the same, there are more car-graders who appreciate and love their transport and intelligence, as well as the warmth of the garage in the garage, in addition to helping to save the beautiful standard of the car and to continue the term of its service. Explore the pleasures of nіzh pofarbuvati walls in garages.

Technical characteristics

see

Water heat pidlog in the garage is a closed system, which can be stored from metal-plastic pipes, which are poured with a concrete screed. Obіgrіv vіdbuvаtі for the rakhunnіtі of the boiler. It is also possible to connect the water supply to the scorched booth, as well as from the garage to the booth.

Installation in garages of warm water pidlog maє a number of perevag:

  • Warmth rіvnomіrno on all surface pіdlogi;
  • There is a clear energy saving for the rakhunok vikorystannya vodynykh pidlog.

There are also negative moments in the installation of water heaters in garages:

  • Labor-intensive installation process;
  • You will need a water pump cleaner;
  • In case of breakdown of some elements of the water state, it is necessary to dismantle the entire structure, which may also be used by a lot of robots.

For organizing a warm pidlog in garages with concrete, you can use a vikorystannya, like a water stat, or an electric one.

For the electrical feed, special cables will be required, as they will also be poured with a concrete screed. Before reloading a warm electrical stati, the following should be applied:

  • There is no need for additional provision of small communal services, except for electricians;
  • The system is secured with a thermostat and a heating cable;
  • The guarantee for the warm electric power supply system can be up to 60 times, the system does not require service.

There are some shortcomings:

  • Visoka electricity supply;
  • In order to reduce the vitrate of electrical energy, it will be necessary to install heat insulation not only in statics, but in all applications.

Photo

Electricity is not less popular, especially as a garage for retouching at the back of the building.

Installation of a warm pidlog in a garage є it is necessary, if the autoclassman writes about his good friend.

Yak zrobiti?

So, since the water heat is most popular for installation in garages, then the installation technology is visible on its own:

  1. As soon as in the garage it has already been used earlier, then a new screed is to be dismantled from the old floor and a new screed is installed to remove the floor surface. At the freshly prompted garage, immediately wipe the surface of the chornovaya pidlogi.
  2. On top of the ryvnogo black piedloga, lay warmth at least 30 mils and more. Yak uteplyuvach can be vikoristovuvati polystyrene or Pіnopleks.
  3. Then the damper line is laid, which is required to compensate for the thermal expansion of the screed.
  4. Distant on top of the heat-insulating ball of polyethylene floss, on it there is already a reinforcement mesh. And on top of the mesh is a pipe for water statі.
  5. At the whole stage, it is necessary to carry out a hydraulic test of the system and a debilitating training. For shortcomings, immediately corrected.
  6. When all the pipes are finished, the screed is poured, as there are pipes about 3 - 15 centimeters.
  7. The concrete should be dry, it is close to the month. The water pidloga should not be switched on during the intervening hour.
  8. If the screed is suspended again, you can start the heating system, step by step increase the temperature.
  9. Then the concrete surface will be covered with a final article for your choice.

I will show you how to generate heat in the garage and marvel at the video:

Floor in a warm garage

In the quality of the finality for warmth in the garage, it is recommended to use ceramic tiles or porcelain stoneware, so the smell is seen by the heat conductor. Read on.
It is possible to fill the concrete pidlog by covering it with special means and a headlamp to get rid of the erasure.

Besides, for warmth pidloga in the garage you can choose a polymeric pidlog or filling pidloga.

Warmth courtesy for garage

The warm water state should be deposited in all areas of the pipeline, obviously, required for the pipe's footage. So, for example, for an area of ​​50 sq. m. The part of a warm water state with 1 circuit will cost approximately 40,000 rubles. Warm electric food service for 50 sq. m will cost approximately in a qiu zh bag, only do not forget, before there will be vitrati on electricity.

Do you want to buy materials for warmth in the garage?

De buy in Moscow:

  1. Company "Tigrohaus", st. Akademika Anokhina, Budynok 64, Budova A, office 9, Contact phone: 8 (499) 737-25-55;
  2. TOV "Group company Agpayp", vul. Promislova, budenink 11, Contact phone: 8 (495) 928-0008;
  3. TOV "Metaflex", 2nd Yuzhnoportoviy proezd, budenok 10, budova 3, Contact phone: 8 (495) 652-92-21.

De buy in St. Petersburg:

  1. Internet shop "Teplі moments", st. Zoryana, Budynok 1, Contact phone: 8 (812) 909-52-01;
  2. Company "Teplosvit", st. Kantemirovskaya, Budinok 39, Contact phone: 8 (812) 970-35-87;
  3. Company "Alpira", st. Voroshilov, Budynok 6A, office 315, Contact phone: 8 (812) 326-28-76.

Video

Soon, the systemic warm pidlog in garages will cease to be broken up, so as a turbo for saving your car is worth it for the first time. And the option can be accepted for whatever relish and hamman.