Gidravlichny press є pristosuvannyam, scho vikoristovutsya with the help of otrimannya vice viskogo rivnya. Most often it will be necessary to get rid of the best form of creative materials, for the transfer of important vantages, the squeezing of words, the development of a great number of ridin meager.

Attach and dia hydraulic press

Self-propelled press from a jack: the basis

The base will be a supporting platform, which is required to be installed. To be sure, it is necessary to develop a computer for a job, and a bit of a vice can be achieved in proportion to the working universities. Insure the necessary equipment so that the frame is good enough to showcase it, but it falls on it, because of a reserve, so as a self-made press will pragmatically develop the frame design.

Select the width of the frame opening in the amount of space from the sizes of the preparation before the processing of the materials. Insure the fact that the indicator cannot be less than the total size of your press's warehouses. The weight is calculated on the basis of the dimensions of the jack, so that the required size of the amplitude of the rod, the height of the working table and the cleanliness of the dimensions for processing the objects are necessary.

The jack must be mounted on the base, with a support for the details, the top of the frame itself will be victorious. Zusilya, which is fed by the stock to the object, which is crumbled, is guilty of being transferred from the crumbling work table. It is mounted on the frame of the jack structure. According to the bed, it’s safe to move uphill and down.

You can make the necessary adjustments by preparing a splinter of stiffening ribs. Take the profile of a square rectangular shape 50x40 / 50x50mm. As long as you do not have a lot of necessary sizes, you can size the great sheet as necessary to the necessary parameters. It is necessary to attach the profiles one to one with the bite-sized parts and the welds in the bottom. Tse give the necessary rigidity of the base.

Schob zrobiti hydraulic self-propelled press from the jack is stable, be sure to weld the steel plate of the screwdriver from 8 to 12 mm with a size of 200x250 mm before the already prepared design. On the skin side, two springs are mounted on the jack, so that they are pulled out - one end to the working table, and one - to the base of the bed. The stench is specially designed for the clamping of the jack at the exit position. The springs are to blame for the size and rigidity.

Preparing the emphasis for hydraulic control

Press from a jack, scho wiggle with your own hands, the mother is guilty of an emphasis, for the preparation of the same material, which is stuck with the stiyok. At the end of the day, the workpiece should be made the same, like the width of the support structure. Prepare the virobi to be welded up to the support structure. Wait an hour to see all the robots fix the attachment, so you allow the perpendicularity of the workpieces to be trimmed, so that you can start. Weld one to one, two 40x40 mm (30-50 cm) before 90 degrees. Dalі workpieces are stored at once and are fixed for additional equipment.

Otzhe, we were given the distance to take the necessary kut z'єdnannya. You can add to kosintsya, scho viyshov, press annexes, as you will be overwhelmed with a weld at inflated temperature.

Yak and for now robity is a familiar element

The first important element, like a weight, with your own hands of the folds is an important emphasis, which can be oversaturated by strains and transfer the vice to the warehouse. For yogo zrobiti, you will need to prepare approximately 10 millimeters of metal for delivery. According to the additional workpieces, the production of three pieces is less than two pieces. Elementy zvaryuєmo from both sides.


Shvidka replaces the emphasis

In order to preserve the possibility of a term change of this element if there is a need to fix it when the device is moved on the stays, in the prepared block it will need to open two separate openings.

Dalі cut two metal sheets 100 mm more, the design is not ready. Plates also need to be hardened by pairs of openings. Place the block on the frame part of the jack, take two bolts at once with nuts and washers, and make the plates in such a rank that there was a smell from both sides of the strikers.

Methods for regulating the working amplitude of the stem

To change the working amplitude of the stem, you can speed up the ways, hovering below:

  • At the upper part of the ramies, install a gwent drive, which will lead to a drive of the stock.
  • Transfer the ability to pick up replacement pads from the metal profile.

Not so foldable to rotate the press from the jack. The seat of the annex is presented below.

Yak to lower the working amplitude of the piston

If it is necessary to speed up the working amplitude of the piston, put a square shape near the intermediate metal profile. The procurement is guilty of being of the same width, as the space between the strips. Weld a profile to the required country. It’s a trick to allow the robot to be lowered for a while.