On the market of opaluvial technology, there are noless types of opaluvial attachments. Ale mi was always famous for its wizards, who are still fond of brightening up everything independently, including radio. I’ll look at those who don’t give them vigotovlyayutsya from the pipes, the smell is rare to know the stasis in apartments. Ale in dacha booths, as well as garages, will be simply irreplaceable. Well, think over the design, the building is a designer subject for the interior.
Samarobka vimagaє protection
All modern radios, readily available in the factory minds, є technically folding attachments.
Infection can occur in such a way that during robots two processes occur at once - heat promotion and convection.
- With the development of that one opaluvial attachment, virobniks will use a lot of factors... We are ready to freeze new technologies, which will allow a significant increase in heat output, changing the overall temperature.
To that self-made opaluvalny attachment to find close, you can not match with the factory according to:
- efficiency of robots;
- compactness;
- design.
It’s good to: first start before preparing the author’s attachment, then firmly assess the quality of the given call.
options for registration
More often than not, the following are the most common:
| section |
Robotic principle:
Slide vrahuvati, so the design will be able to experience a lasting grip, and before the ear of exploitation, it is necessary to reconsider the reliability of the young seamstresses. |
| zmyovik | The form of these attachments can be judged by their names. Daniy is used to store up the scorched elements, one with one zvaryuvannya path. The serpent does not make any of the intermediate problems and sounds, and the whole surface heats up during the circulation of the day. This will allow me to add more warmth with a more low grip of heat. |
preparation
You need to use the battery to power up the battery, it’s necessary for mothers to use the best tools for the technology necessary for the development and development of metal. At the same hour, the size of the opalescent attachment can be safely stored away from the necessary exertion.
pulling up
So, as in the quality of the heat, you will be able to get rid of the ridina, carry out the process for a special formula, and from the outside area, I will add a step of heat conductivity to the material that is victorious when the pipes are prepared. The most simple and simple way is to use a battery for the butt.
As a rule, the toughness of the chavunnaya section, as a rule, costs 160 W, and in the place of 1.45 liters of water, the radiator, which can be stored in ten sections, can replace the decalcom with pipes, which can accommodate in itself a lot of water.
According to the current standard, for 1 m2 of living area, 1 kW of power can be applied to the supply.
It’s good: the average indicator of heat recovery, as the heat insulation of the booth, is overflowing.
In the photo you can see details in one design
preparation
You know:
- 2 m of pipes from steel with a thickness of not less than 3.5 mm and Ø 120 mm;
- sheet of steel of the same type for caps;
- pipe, yak vikoristovutsya at water supply systems;
- threading elements for connecting pipes (bushings) Ø 25 mm - 2 pcs.;
- fittings for the addition of structural rigidity;
- for attaching the attachment to the system - thread z'єdnannya.
In the ideal, all the materials you can see at your dacha or in the garage, so that you will get only vitrati at the electrodynamic and electrical power. Well, in obscurity, it is possible to get involved in a punctual reception of metalworking, the price is on the bottom of the store.
It’s good: I’ve gotten used to planning to be victorious in the living room, docilely pribati new trumpets.
Head - do not bathe pipes larger than 120 mm in diameter. It’s not just the heat supply, but, according to the idea, it’s guilty to increase the heat output, but to put it on the boiler. And at the same time I will be loaded with additional vitrats to pay for the scorching.
process
Instructions will be coming:
- Razrіzhte steel pipe into 3 identical parts.
- Open the openings in the skin from the trimmed parts, designed for attaching the draw-off pipes.
Glad: open the guilt rosters on the sides 50 mm from the ends and in the small children, as well as from the side 180 ° to one side.
- Vyryzhte from the steel sheet round elements of the same diameter as the main pipe, the very smell and function of the plug.
- Weld it to the butt ends.
- Fasten to the openings of the tube, designated for the supply of water, and connect the tubes and one by one after the auxiliary fittings. If the battery is large, then install additional jumpers. Becoming between the main pipes is responsible for becoming 5 mm larger than the diameter of the main pipe.
- Reverse the ready-made radiator for testing. For this, close the lower opening, and supply water to the upper one, but in the same grip, as it is added to the contour. As long as it does not appear, the device is ready to use and can be inserted into the system.
- Falling into the type of mounting - stand-alone or fixed, to the radiator, weld nizhni or brackets.
It's good: as soon as in the natural circulation of water, the radiator will be installed with a small hole along the movement of the water.
The technology of the preparation of the serpent is not easy to describe, since everything is considered an analogous rank. Naygolovnіshe here doesn’t overdo it and don’t take the great diameter pipe to prepare it.
Porada: more planes to break the crossbeams, with the smallest diameter you need to pick up the trumpets.
visnovok
The preparation of the radio operator is scorched with his own hands, taking care of the copy, as well as the use of singing tools, knowledge and possession. You can completely substitute your own battery, if you need to deplete the state’s primacy or a room in the living room. The video in the tsy statty will give you the opportunity to know the additional information about the above mentioned topics.
