Estakada is an indispensable tool for looking around and repairing a passenger car. It is not great for a mini-design to be able to use your hands in your home minds. Importantly taking care of all dimensions and installation on the dimensions of your car.

The need to install a mini-eater. Pristiy

A modern automobile is a technically folding attachment, which will provide periodic technical servicing, replace accessories and vitratic materials, and other repairs. A lot of inadequate vehicles vvazhayut for making a precise inspection of the car at least at the service station and pay for the replacement of oil.

Greater admonition of the water To heal more robots with his own hands. For everyone in the garage it is not easy to set up a self-propelled walkway - a design, for the rest of which it is possible to see the bottom of a car.

There are two types of estacadies:


The first close function of the place is similar to the oglyadovy pit. Vona will provide access to the underside of the car. However, with a high level of groundwater contamination in the garage, it is not enough to see the hole around the hole: it will be constantly flooded with water, so it will require an additional drainage system, and on the metal parts of the car.

Povnorozmіrna takada - the price of a monolithic design, as it is possible to install in the repair motorways and uzdovzh live trails. For the її installation, it is necessary to have a lot of mistsya - the length of the virobi is to become close to six meters above the ground, plus the arrival. The availability of such an option at a vlast private garage is justified, as it is being protected for two cars, some of which are empty.

Mini-estakada is a small portable design, designed for a private car park. In the її basis - two independent parts, not tied one to one. The car will be ready for preparation with rear or front wheels, and it will ride over the old or earth and allow the school attendants to carry out the first round or cosmetic repairs.

The wake of mini-estakadi is the possibility of a victorious party in a contiguous space. The message of the robot can be pulled aside. The main design minuses are in front of the offensive:

  1. Jewelery accuracy is required to visit the site. In іnshomu vypadnaya can be thrown over the design or shkodzhennya cars.
  2. Elements of the design are installed in the missions, so there is no possibility that the stench rises in the sides from the smallest shipment.

Zagalny vimogi

When a standard set is prepared, a number of vimogs need to be trimmed. This will help you to secure your robot and your car.

  • The visota of the large repair construction is close to a meter. This allows you to safely climb into the car, to prevent a sufficient surge of natural light for looking around the chassis, to carry out the necessary manipulation of spare parts and tools. The visota of mini-estakadi with a private check-in is close to a meter: there is no detailed picking up of the car.
  • The width of the structure must not lie in the middle of the type and dimensions of the car. It is not varied to change the size to a millimeter, when the construction is designed, it is necessary to create small allowances. The machine is guilty without pereshkodnoy zaizhdzhati on the pomist.
  • Mini-estakadi vikoristovuyutsya for a look around and repair of passenger cars. For a stationary design, an additional supply of energy is transferred. Zavdyaki tsomu virib in an hour does not deform. It is also possible to get to a new place and to reach important transport.

vibir material

Є the best way to get a quick start or a mini-quick trip for car repairs with your own hands.

tseglyana construction

The steeple rack is a stationary construction, which is often victorious in the Silk world, or beyond the place. The construction is carried out by the method of celluloid masonry on a cement roschin. The width of the structure is due to the width of the wheels of a car.

Tsey sposib maє a number of shortcomings:

  1. It is necessary to see a lot of land for oblastuvannya. It will be necessary to tidy up the store every year, and dismantle the thirsty significant forces in an hour.
  2. In a dozen hour, in a flood, the rewiring of the tseglyan masonry can be zruynuvatisya, in addition to what can be known, dismantling.

Rack with sleepers

The design is based on a spike of zaliznichny sleepers. Laying one on the bottom in the style of "girki" sleepers set up two bases. Across the room, you can get in. The ladder from the sleepers is NOT rosy during the operation, it should be fastened with staples.

This design is also short-lived.

  1. Sleepers in the side are not so often observed, and not at the skin classmate є kilka zayvykh.
  2. One-by-one install and select the installation is unwise. Sleepers were even more important.
  3. For the sake of the winter sleepers, it is necessary to use it.

Vikoristannya festakadi from zaliznichny sleepers is justified for summer cottages or gardens, as long as the design is used in the open-ended situation. To get rid of the gnitty, virib seep out with creosote.

metal

Most often it is easy to get used to metal and wood planks. Perevagi metalyevoy estakadi:

  1. Mobility. When bazanny, the design can be used to pick up and pick up only before the cob is repaired. The staff will save a lot of money.
  2. Simplicity of design. You can pick up the metal restaurant with your own hands from the victorious minimum of tools.
  3. Dovgivichnist. With diligent glance and watchful glance at the metal stage, it can last for about ten rock and more.

Є th deyakі are inadequate. I have metal scraps of schillies to the point of corrosion, so in front of the robot, the material needs to be covered with special leaks.

In the middle of the main passages of the tree, one can see the simplicity of the collection and the cheapness of materials. It is easy to stand up, and if necessary, you can quickly dismantle and clean up. You don’t know the fold-out specialization of the installation, you don’t need to bring the extraordinary Teslyar instruments, like є to the skin booth. In the midst of a shortage of wood structures, it is possible to mean a low degree of durability, a weak stiffness to nagging and coma. Some problems can be violated for additional treatment with antiseptics, antipyrenes and insecticides.

Tools and materials

Self-preparation of wood or metal structures for visualization of singing materials and tools. There is no need to purchase a fold-out special setup, to finish up with some electric tools, which are sold in a leather store.

It is necessary for the meeting of the metal industry

To prepare a special metal environment, you will need advanced materials and tools:

  1. Rolled metal.
  2. Zvaryuvalny device with a set of electrodes.
  3. The grinder is equipped with a decilkom in other circles.
  4. Armature cords.
  5. Fasteners: bolts, nuts.
  6. Farb for metal for residual processing of the structure.

Materials and tools for woodwork

For the preparation of the simplest portable trees, a minimum of materials and tools are required:

  1. Boards with a product range of 45-50 mils. As soon as more thin boards are placed, additional vertical supports are placed in the center of the ladder.
  2. Two wood blocks.
  3. Two pieces of wagon board.
  4. Screws (150-ka), tsvyakhi (300-ka), vikrutki, hammer, saw on wood.

Preparing for robotics and folding the chair

Before preparing the seat, it is necessary to carry out a series of tests. The mini-walkway is stored from two independent installations. The width of the skin of them is suitable for the wheel of a car with a small margin. Promizhok between door installations and vehicle wheels. At all stages of the process, we prepare tools, materials and mice of robots.

All specifications are approximate and available for skin model cars

Metal construction with your own hands

It is planned for the metal installer to plan to be victorious in decilkoh missions, because it is necessary only occasionally, the design can be made in a separate and distributed version. Tse allow shvidko zіbrati її in the world to consume with a stretch of pіvgodini.

Zbіrka metal festa to see the offensive rank:

  1. Collecting pedestals. Billets are made out of stock from the size of a car. The workpieces can be laid out on the arches of chipboard or on the same surface and fixed at 90 degrees (for the purpose of making the cut, you can choose an awesome wake-up call). Pislya of all the promises of the workpiece is engraved with oneself.

    All parts are separated by a straight kut

  2. Going out of the way. Visota - close to a meter, cut - close to 120 degrees. Fiksuyutsya, scalded.

    Kuti and bichnі stіni guilty buti іvnimi

  3. The top supports of the pedestals are welded on. For all the upper coils, be surrounded by stitches, vistavlyayutsya along the coot at 90 degrees, scalded.
  4. Prepare to support the base, vistavlyayutsya under a straight cut and welded.

    You can go through the education in the main universities beforehand.

  5. It will weld on the dead end of the tummy. It’s necessary, so the car didn’t go far and didn’t roll over. The detail is loose with a coil 63 * 63 * 5 mm.
  6. Reinforcing crossbars are welded to the finished bollard. To race against them, you can pick up the same length of 63 * 63 * 5 mm. The fittings are arranged in such a way that the yalinkas were crossed.

    Yak pattern vikoristovutsya an extravagant wake-up call with a side of 63 millimeters

  7. Zbirka trap (mistkiv). The workpieces are drawn, fixed behind the help of the clamps on the coils. Up to the coils are welded like reinforcing bars, the yak can be made according to the template coils, the "yalinki" are crossed. The cuts are welded to the blanks.

    For cim places, the car will be sent to the fast track

  8. Conclusions stage - race. At the same time, part of the offense can be seen in front of you. The center of the pedestals is indicated, the design is displayed in front of the width of the car. Drill openings in ladders and pedestals, so that the elements can be drawn from themselves for help bolts. The staff chatting about the day can be easily distributed and taken over from the store.

The design is ready to be cleaned with a metal brush, degreased and barred.

The construction is ready to be seen approximately like this

Preparing a tree mini-eestakadi

Nayprost_sha tree walkway to climb from two pairs of wood beams with a 20-20 cm miter. The improvised fast track is ready.

It is convenient for a tree to climb out of the planks, as it is knocked into a wide "shield-piramida". On one of the sides, I grabbed a car for a check-in.

Another option is a mini-walkway to get out of some 50-millimeter boards, two blocks, lining and cradle.


Podibna design vikoristovuєtsya for the repair of passenger cars. For the important transport of varto, set up a stationary pass.

Video: Zbirka metal construction

Independently vygotoviti mini-estakadu can be a skinny avtoclassnik. It is even more important to reconsider the design of the design in front of him, like driving a car and repairing a robot.