Scheme of strengthening the stitching base - armoring with crocs

The processes that go to the ground, for example, frosty heaving, stretch the striking monolithic foundation at the sides. Concrete without armouring will not showcase the same way, so it’s like it’s podovzhutsya without breaking only 0.2 - 0.4 mm. Steel is stretched by 4-25 mm without shkodi, so the concrete construction is on the way. It is important for the robotic system of the system to develop a scheme that correctly identifies an armory. It is possible to break the price independently, but not to ruin the instructions.

1. Painting the armchair.

Before the racking of materials, stock a scheme that meets the current standards. The fittings for the foundation last for work and construction. The first group is working on the raztyag, and the other is taking the shape of the frame for an hour.

For a loosely-glued striking foundation, grind two rows of late working fittings in the mountains and at the bottom, in the middle to insert for performance when concrete. The line is fixed in equal measure, the maximum height between the later clippers is 40 cm. In both cases, the main role of the vertical armature is to add the frame, so for the new one they vibrate the darts with a smaller diameter. If the height of the line of the double-top booth is more than 70 cm, for the purpose of tying the concrete preparation and foundation.

Мінімалівідстані між elements:

• Between vertical rods - no more than 50 cm.
• Drying ball for concrete - 3-5 cm, even before the base є concrete preparation; 7 cm, if it is mute.
• Placed between late fittings - not less than 3-6 cm, fallen asleep from a number of shears in a row, and not more than 20 cm.

Kuti and the mіstsya z'єdnannya zdnіshnoї and internal lines to recognize the great navantazhen. It is important to vivchіt armchair and armouring diagrams of the striking foundation. For kutіv vikoristovoyut P-і G-sub-circuits. If you want to cut the hair in front of the front, then you can make the knitting of the surrounding elements in the cich mice until the concrete is shaved and chipped. Cross reinforcement in such zones should be installed 2 times more often.

2. Vibrate and support materials.

Most often it is vicious to use class A-III (A400-A500) ribbed reinforcement with a diameter of 6-16 mm, so it is more beautiful to use concrete. For vertical clamps at the jogging base, take smooth A-I-A-II. The diameter is to lay down from the vagi and the construction of the foundation, lower than the guideline of the minimum changes for the skin. As soon as you look at the scheme of the armoring of the important budget, you should entrust the designation of the projects to the designers. Correctly rozrahuvati navantazhennya and vibrate the optimal diameter and number of haircuts independently foldable.

3. To clean the surface of the base from the front surface, to remove the frame.

4. Zginayut hairs for clamps and kutiv.

There is no single end of the laying of reinforcement, vibrate to lay down from the area and number of workers. For small children, the elements are ringing in chunks, and then in chunks at the trench. Ale so vstanovlyuvat the frame with your own forces vzkho, especially if the viconati armuvannya striking the foundation of the great area. To that far, we can choose the order of the arrangement, as it is often the case of small weekday brigades.

5. Vstanovlyuyut clamps on concrete podstavki chi fiksatori-toad. Schob the frame, without moving through the new one, pass the tightly pulled trolley or tie the leather element to the formwork.

6. In the design they insert late haircuts and fix them on toads.

7. Armuvannya kutiv vikonuyut, as for the whole vikoristovuyut additional elements.

8. To knit the whole structure. A report on the methods of making a report is at the distribution of recommendations.

9. Vstanovlyuyut fixtures between formwork walls and reinforcement.

10. Revise the technique and visibility of the axes, and the line foundation is not lopsided in an hour.

Nuance robot

1. Rozrakhunok materials armuvannya.

The gearbox, the fittings were screwed over the overlap (30-50 mm). The standard cut is 11.7 m. Do not overwhelm the cut, the amount of labor required to move, but it will be unwise to sell the fittings to the cylograms.

2. Z'єdnannya.

Strizhny weld, knit chi skriplyut clutches. It is more beautiful to knit the elements of armoring, and not to solder, for that the benefit of the frame is falling, especially if it is necessary to leave it without concrete in the weather. Schob to speed the vitrate of reinforcement for striking the foundation, lock the couplings, so for brazing it is recommended to close the twigs with an overlap of 10-15 cm, lying in diameter. As soon as you knit it, set 10 diameters for concrete grades from M300 and 15 - for M200.

You can use a hook, a special pistol and a screwdriver, or drilled with a nozzle from a screwdriver. Proceedings for the hardening of the stitching base with manual knitting in a stitch takes about an hour.

3. Significant haircuts.

By the way, by the way, bend the fittings, ale the stink is expensive, so the maystri saw the best ways to make the clamps themselves. For example, weld two coils to a flat vertical surface, insert a rod and bend, pushing it onto the pipe. Reinforcement with a diameter of 6-8 mm is used to feed bream. As long as you have є skill, it will be easy to realize the idea with two parallel coils. The head, the whiskers must be straight, but the sides of the clamps were in the same area;

4. Preparation of armouvane items.

The clippers will slightly get wet a couple of days before pouring, they will make the steel with concrete, but before the cym, they will see the rzhu, which is visible, with a metal brush.

May grave

If people, without admonition, arm the construction with their own hands, often do not smell at the quality of the type of pro-rakhunks, and bring the result to the sum.

Schob zalizobeton pratsyuvav, obov'yazkovo vikonuvati armouring of the monolithic foundation for correctly folding the armchairs. It is very important for a straightforward dibnozaglibelnoy basis, some of it is in the zone of post-ruku runtu.

As soon as you visit the armory with your own hands, respectfully accept the instructions, see if you will be helped by specially trained workers. Supervise the process, so that the company hires people who don’t know the elementary standards of business, or just hack.