As soon as there were woods between the boards, and the old farba came out, the food was given about those who didn’t see the boards. Oskilki still want to, so the food was tough and without seeing any outside sounds when walking.

Why creak pidlogs? The main reasons are the viscosity and deformation of the pokritty, for which it is necessary to put down the factor.

How can you squeak? Vibir is the way to lay it down from the fact that some meanings of the unevenness of the pine tree are.

Check the advanced methods of updating the stat:

  • cycling of the dough;
  • wet screed;
  • pokritta sheet;
  • putty.

Schob virіshity, as a virіvnyati tree of a pidlog, it is necessary to be sure, some of them are inert. It is necessary to display the assessments in kutas and in the center of the walls. The bigger the size, the bigger the demand. For the additional help of the wake-up call, the height difference appears, and the method starts.

cycling pidlogs

This is the way to carry out the shlіfuvannya tovsty flooring. On a new level, there is no flush in the loss of people from the surface of the milimeters. Shlifuvannya - the price to complete the laborious and expensive process, as well as the great guchny and kurniy. I, if I need to turn on the cycling machine, I will still be able to hand over the service in places that are inaccessible for awake possession. Yak vidshlifuvati pokrittya right?

Tsiklyuvannya is guilty but also prepared. The boards are guilty, but mintly nailed, screws and flowers are added to the fuel, so do not drive the car. Pokritty is not guilty of having thin and unclear bridges. Cycling of the plate behind the aid of the cycling machine is carried out in earpieces, respirators and in eyepieces.

Fragments of a pidlog are covered with linoleum, a lamina, or else it’s bored.

Wiping wood pidlogs for additional wet screed

This is a way of making a little bit of vikorist for shaping a board for a pidloga. Cement is a hard and important material that will help you to build wood planks. For lodging navantazhennya on them vikorystovuєtsya pіnoplast. It’s all the same, it’s simpler to make a new fill, having tidied up the wood planks in front of the front.

Before pouring the cement screed, it is necessary to be familiar with the installation of the display window. Cover the trees with polyethylene, so that they can be cleaned from any kind of wild madness.

In case of irregularities of 3 to 10 mm, it is possible to save self-checking summaries, if you choose a business, and if you are allowed to make changes on the backlog. This is the name given to the fact that in their warehouses there are polymeric materials that can be used to smooth out the material. The robots vyroblyayutsya svidko, ale in front of the surface of the tree pidlogi is guilty but it is prepared. The whole method is expensive and laborious.

The trees are grounded, cracks and irregularities are putty. For the installation on the surface of the lighthouses, we will be able to wind up, and between them the mesh will be overlapped.

Samovirіvnyuchaya sumіsh is duly applied and dispensed with a spatula. After a few years, linoleum or laminate should be laid on an absolutely smooth surface.

Cover sheet and putty

For the most recent term, the bridges could bend. How can you make a pidlog without seeing the boards? Chipboard, plywood or OSB are laid directly on the podgotovki pidlogu.

For similar bridges, select thin plywood. When digit poshkodzhennyah vikoristovuєtsya pokrittya tovschinoyu Hope 1.5 cm. Zakrіplyuyuchi sheet at dopomoga shurupіv in mіstsyah stikіv zalishayut to 2 mm and potіm shpatljujut.

If the pidlog needs to be lifted, the sheets should be laid on a support from an important beam. Lags are installed horizontally on the sides from 30 to 50 cm. Bars are placed before them, so called shabashki. For the installation, re-adjust the height of the lags for the additional laser level.

If the timber is thin, then the lags should be fastened to the boards with large dowels on the side of 30 cm, one at the same time. In the middle of the lattice between the lags, there is a gorge from the sum of thyrsi and PVA, polystyrene or polystyrene as heat insulation and for additional sound insulation.

Pokrittya sheets are laid out by the method of solid masonry, and to the lags they are fastened with screws.

It will be equal to the difference between the bridge up to 3 mm, on any bedding there is a laminate, acrylic putty or on the basis of PVA. She can lay the slabs between the boards. The spackle is elastic, so you will not be able to sit and grow.

There was no need to pick up a tree pidlog, as the surface in an hour unsuccessfully hit and became nervous. The basis of the pidlog is to finish the mitsne, and the lags are the mitsn. Yogo can be verified by one of the described methods, which is the most beautiful for singing defects.